[ SURGE PROTECTIVE DEVICE // STATIC REFERENCE ]
CyberPower Professional 6-Outlet Surge Protector with Tel/DSL Protection CSP606T
Six grounded NEMA 5-15R AC outlets (five standard and one transformer-spaced); RJ11 phone/DSL line path. 1,350 J per CyberPower’s model-specific product listing. 6 ft cord; right-angle plug, per manufacturer product materials. Exact revisions and regional suffixes matter; verify the nameplate and current manufacturer instructions before use.
SAFETY SCOPE: A surge strip cannot guarantee protection from every event, correct defective grounding, or supply battery runtime. A light is not a ground tester. Follow the current model-specific manual, inspect the actual nameplate, and use qualified electrical help where required.
Model specifications and topology
| Manufacturer / exact model | CyberPower CSP606T — model-specific record; confirm the label, revision and region on the actual product. |
|---|---|
| Device class / function | Cord-connected point-of-use surge protective power strip. RJ11 Tel/DSL input/output, EMI/RFI filtering and resettable 15 A breaker. No clamping figure is asserted; do not connect signal paths not supported by the manual. It is not a UPS and does not provide outage runtime. |
| Electrical rating | 125 V AC, 15 A / 1,875 W maximum. Telephone-line ports protect only an appropriately connected supported line. |
| Surge-energy rating | 1,350 J per CyberPower’s model-specific product listing. Joules describe a published surge rating, not continuous load, device lifetime, or a guarantee against all transients. |
| Outlets / cord | Six grounded NEMA 5-15R AC outlets (five standard and one transformer-spaced); RJ11 phone/DSL line path. 6 ft cord; right-angle plug, per manufacturer product materials. |
| Clamping / let-through voltage | No clamping or let-through voltage claim is made here. Do not derive one from a joule rating; consult the exact model’s current certification record and manual if this value is needed. |
| Indicators / monitoring | Surge-protected and grounded LEDs; these do not verify the branch-circuit ground. |
| Safety certification | Manufacturer literature identifies UL 1449 / UL 1363 and cUL approvals for this series/model; verify exact nameplate and manual edition. |
| Warranty / connected equipment | Limited lifetime product warranty and up to US$75,000 connected-equipment guarantee, subject to terms, eligibility and exclusions. |
| Compatibility | Use only on a compatible grounded North American circuit at the exact nameplate rating. Match plugs and voltage; do not exceed 15 A where that rating is stated. Signal-line protection, if present, applies only to supported cables connected exactly as documented. |
Compatibility and application
Six AC outlets and an RJ11 Tel/DSL protection path; 1,350 J and 6 ft cord are model-specific listed values. Confirm input voltage, connector, available branch-circuit capacity, USB limits and the manufacturer’s listed use from the cited manual. A joule rating does not raise the permissible load and does not define clamping behavior.
Use only in the environment stated on the label and manual. Avoid daisy-chaining, ungrounded/damaged/wet outlets, overloaded extension arrangements, and unsupported signal-line connections. Do not open the enclosure or defeat the grounding pin.
Protection, ground and lifecycle caveats
- Grounding and protection indicators report the device’s monitored condition only; they do not prove the building wiring is properly grounded or that all surge paths are protected.
- Retire a damaged product or one whose protection-failure status requires replacement under its manual. A resettable breaker does not replace branch-circuit protection or authorize overload.
- Transient protection cannot guarantee survival from lightning, wiring faults, sustained overvoltage, or events entering through an unprotected data/signal path. Warranty and connected-equipment coverage have exclusions and claim conditions.
Manufacturer sources
- CyberPower — CSP606T product details and downloadsManufacturer model/product source for the named SKU and stated feature data; revisions and regions can differ.
- CyberPower — CSP606T user manualManufacturer manual or product-documentation source. Use the exact unit label and the current revision before installation.