ALIENCULTIST.COM
HARDWARE ARCHIVES // MODEL RECORD

[ SURGE PROTECTIVE DEVICE // STATIC REFERENCE ]

Belkin 12-Outlet Surge Protector with USB Charging BV112050-06

Twelve AC receptacles (six standard and six BlockSpace positions) plus two USB-A charging ports, per Belkin support listing. 3,996 J is the model listing’s energy rating. No clamping voltage is asserted here. 6 ft cord, as identified in model-specific product support; confirm the suffix on the product label. Exact revisions and regional suffixes matter; verify the nameplate and current manufacturer instructions before use.

Original schematic of the BV112050-06 surge-protective strip; functional illustration, not a wiring diagram
ORIGINAL LOCAL SVG // FUNCTIONAL SCHEMATIC, NOT TO SCALE

SAFETY SCOPE: A surge strip cannot guarantee protection from every event, correct defective grounding, or supply battery runtime. A light is not a ground tester. Follow the current model-specific manual, inspect the actual nameplate, and use qualified electrical help where required.

Model specifications and topology

Manufacturer / exact modelBelkin BV112050-06 — model-specific record; confirm the label, revision and region on the actual product.
Device class / functionCord-connected point-of-use surge protective power strip. USB ports are charging-only; no battery or outage runtime. Do not daisy-chain strips or use with ungrounded receptacles. It is not a UPS and does not provide outage runtime.
Electrical rating120 V AC, 15 A maximum for the North American model. Use only a grounded compatible circuit.
Surge-energy rating3,996 J is the model listing’s energy rating. No clamping voltage is asserted here. Joules describe a published surge rating, not continuous load, device lifetime, or a guarantee against all transients.
Outlets / cordTwelve AC receptacles (six standard and six BlockSpace positions) plus two USB-A charging ports, per Belkin support listing. 6 ft cord, as identified in model-specific product support; confirm the suffix on the product label.
Clamping / let-through voltageNo clamping or let-through voltage claim is made here. Do not derive one from a joule rating; consult the exact model’s current certification record and manual if this value is needed.
Indicators / monitoringCheck protection and ground status indications specified on the exact unit; LEDs cannot validate the wall receptacle ground.
Safety certificationVerify the applicable UL/cUL mark on the exact unit and its current support documentation; no certification is inferred from a different suffix or region.
Warranty / connected equipmentBelkin identifies a limited lifetime product warranty and up to US$250,000 connected-equipment warranty for this model; eligibility, claim process, exclusions and regional terms apply. The coverage is not a guarantee that equipment will survive a surge.
CompatibilityUse only on a compatible grounded North American circuit at the exact nameplate rating. Match plugs and voltage; do not exceed 15 A where that rating is stated. Signal-line protection, if present, applies only to supported cables connected exactly as documented.

Compatibility and application

Twelve grounded AC outlets plus USB charging and Belkin-listed 3,996 J energy rating. Confirm input voltage, connector, available branch-circuit capacity, USB limits and the manufacturer’s listed use from the cited manual. A joule rating does not raise the permissible load and does not define clamping behavior.

Use only in the environment stated on the label and manual. Avoid daisy-chaining, ungrounded/damaged/wet outlets, overloaded extension arrangements, and unsupported signal-line connections. Do not open the enclosure or defeat the grounding pin.

Protection, ground and lifecycle caveats

  • Grounding and protection indicators report the device’s monitored condition only; they do not prove the building wiring is properly grounded or that all surge paths are protected.
  • Retire a damaged product or one whose protection-failure status requires replacement under its manual. A resettable breaker does not replace branch-circuit protection or authorize overload.
  • Transient protection cannot guarantee survival from lightning, wiring faults, sustained overvoltage, or events entering through an unprotected data/signal path. Warranty and connected-equipment coverage have exclusions and claim conditions.

Manufacturer sources

  1. Belkin — BV112050-06 model support and product detailsManufacturer model/product source for the named SKU and stated feature data; revisions and regions can differ.
  2. Belkin — Connected Equipment Warranty termsManufacturer policy source describing claim requirements and coverage limits; regional terms apply.