[ INDIVIDUAL COMPONENT // CONSUMER SATA SSD ]
SanDisk SSD PLUS 1 TB
Capacity-specific record for manufacturer part number SDSSDA-1T00-G26. Specifications are restricted to cited manufacturer information; series-wide or typical figures are identified as such rather than treated as guarantees for every device or revision.
IDENTIFICATION: Match the full model/SKU SDSSDA-1T00-G26, capacity, label, and firmware before servicing or replacing a drive. This is a consumer 2.5-inch SATA SSD, not an M.2 or NVMe device.
Specifications & compatibility
| Manufacturer / model / SKU | SanDisk SSD PLUS 1 TB // SDSSDA-1T00-G26 |
|---|---|
| Capacity | 1 TB nominal capacity. |
| Form factor / interface | 2.5-inch, 7 mm; SATA III 6 Gb/s. |
| NAND | NAND type and supplier are not specified for this exact SKU in the cited public manufacturer sources. |
| Rated sequential performance | SanDisk publishes up to 535 MB/s read and 450 MB/s write for the applicable SSD PLUS generation; exact sustained performance depends on host and workload. |
| Endurance | No TBW value is published in the cited manufacturer sources for this SKU; do not infer one from warranty duration. |
| Warranty | 3-year limited warranty for the applicable SSD PLUS product family; verify model/region on SanDisk support before purchase or claim. |
| Revision / identification | The cited manufacturer sources do not specify a fixed, field-interchangeable internal hardware revision for this consumer SKU. Preserve the full label, serial, firmware, and purchase region; confirm any service/firmware procedure with the manufacturer for the exact unit. |
| Host compatibility | Requires a compatible 2.5-inch SATA data and power connection; this SATA III drive can negotiate with older SATA hosts at their supported link speed. Verify bay height/adapter, connector, BIOS storage mode, operating-system driver, boot support, and TRIM/SMART pass-through through any enclosure or controller. |
Preservation & maintenance
- Record the drive label, full part number, serial, firmware, host/controller, and a read-only SMART snapshot before migration or configuration changes.
- Keep independent, verified backups; endurance, warranty, and SMART indicators do not guarantee remaining life or data retention.
- Do not assume NAND/controller interchangeability across production lots. Use only manufacturer instructions for firmware updates, secure erase, diagnostics, and warranty claims.
Manufacturer sources
- SanDisk — SSD PLUS SATA SSD product pageManufacturer product-family page; verify exact model suffix and regional availability.
- SanDisk — Internal SSD endurance and warranty periodsManufacturer support reference for model-dependent endurance/warranty lookup.
Both references above are HTTPS manufacturer sources. Where a value is not fixed or published for this exact SKU, it is identified as unspecified instead of inferred from a reseller or a different family capacity.