[ INDIVIDUAL COMPONENT // CONSUMER SATA SSD ]
Lexar NS100 1 TB
Capacity-specific record for manufacturer part number LNS100-1TRBNA. Specifications are restricted to cited manufacturer information; series-wide or typical figures are identified as such rather than treated as guarantees for every device or revision.
IDENTIFICATION: Match the full model/SKU LNS100-1TRBNA, capacity, label, and firmware before servicing or replacing a drive. This is a consumer 2.5-inch SATA SSD, not an M.2 or NVMe device.
Specifications & compatibility
| Manufacturer / model / SKU | Lexar NS100 1 TB // LNS100-1TRBNA |
|---|---|
| Capacity | 1 TB nominal capacity. |
| Form factor / interface | 2.5-inch, 7 mm; SATA III 6 Gb/s. |
| NAND | The cited public Lexar product page does not identify a guaranteed NAND cell type, supplier, or fixed internal revision for this SKU. |
| Rated sequential performance | Up to 550 MB/s read; Lexar says write speeds are lower but does not publish an exact 1 TB write ceiling on the cited page. |
| Endurance | No capacity-specific TBW value is listed in the cited manufacturer product information. |
| Warranty | 3-year limited warranty for the NS100 family; subject to regional terms, proof of purchase, and authorized-sale conditions. |
| Revision / identification | The cited manufacturer sources do not specify a fixed, field-interchangeable internal hardware revision for this consumer SKU. Preserve the full label, serial, firmware, and purchase region; confirm any service/firmware procedure with the manufacturer for the exact unit. |
| Host compatibility | Requires a compatible 2.5-inch SATA data and power connection; this SATA III drive can negotiate with older SATA hosts at their supported link speed. Verify bay height/adapter, connector, BIOS storage mode, operating-system driver, boot support, and TRIM/SMART pass-through through any enclosure or controller. |
Preservation & maintenance
- Record the drive label, full part number, serial, firmware, host/controller, and a read-only SMART snapshot before migration or configuration changes.
- Keep independent, verified backups; endurance, warranty, and SMART indicators do not guarantee remaining life or data retention.
- Do not assume NAND/controller interchangeability across production lots. Use only manufacturer instructions for firmware updates, secure erase, diagnostics, and warranty claims.
Manufacturer sources
- Lexar — NS100 2.5-inch SATA SSD product pageManufacturer product specifications, family features, and performance disclosures.
- Lexar — Warranty informationManufacturer warranty terms; confirm the exact model and country.
Both references above are HTTPS manufacturer sources. Where a value is not fixed or published for this exact SKU, it is identified as unspecified instead of inferred from a reseller or a different family capacity.