[ INDIVIDUAL COMPONENT // CONSUMER SATA SSD ]
KLEVV NEO N400 480 GB
Capacity-specific catalog record for manufacturer model/SKU NEO N400 480 GB (model capacity identifier). Specifications are scoped to this capacity and the cited model information; other capacities and revisions may differ.
IDENTIFICATION: Match the full SKU NEO N400 480 GB (model capacity identifier), capacity, and label/revision before service or replacement. This is a consumer 2.5-inch SATA drive, not an enterprise model or an NVMe device.
Specifications & compatibility
| Manufacturer / model / SKU | KLEVV NEO N400 // NEO N400 480 GB (model capacity identifier) |
|---|---|
| Capacity | 480 GB nominal model capacity. |
| Form factor / interface | 2.5-inch, 7 mm height; SATA III 6 Gb/s. |
| NAND | 3D TLC NAND with SLC caching according to the manufacturer specification; NAND supplier/revision may vary. |
| Rated sequential performance | Up to 500 MB/s sequential read; up to 480 MB/s sequential write. These are published peak figures, not a guarantee of sustained writes or every host workload. |
| Endurance | 200 TBW manufacturer technical specification for the 480 GB capacity. TBW is a rated-write limit, not a prediction of an individual drive's service life. |
| Host compatibility | Uses standard 2.5-inch SATA data and power connectors and fits a 7 mm-compatible drive bay. Backward link negotiation depends on the SATA host; verify enclosure/caddy fit, boot mode, and OS TRIM support. |
| TRIM / SMART / firmware | Use the host OS, SATA controller, and firmware tools supported for this exact model/revision. TRIM and SMART pass-through depend on the OS driver, controller mode, enclosure, and bridge; check vendor documentation before firmware changes. |
Preservation & maintenance
- Record the label, exact SKU, serial, firmware, host/controller, and a read-only SMART snapshot before migrating or changing settings.
- Keep independent, verified backups. A TBW rating, SMART indicator, warranty, or wear estimate is not a guarantee of data retention or remaining life.
- Use the manufacturer's exact-model guidance for firmware, secure erase, encryption, diagnostics, and warranty; preserve the original label and firmware state.
- Do not assume identical NAND or controller internals across production batches unless the manufacturer identifies the revision.
Sources
- KLEVV — NEO N400 product pageHTTPS source; model/capacity details cross-referenced with the separate listed source.
- ESSENCORE — NEO N400 technical specificationHTTPS source; model/capacity details cross-referenced with the separate listed source.
Two distinct HTTPS references are provided for cross-checking. Where an attribute is not fixed or published for the exact SKU, this record says so rather than inferring a family-wide value.