ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ MAGNETIC REMOVABLE CARTRIDGES // IDENTIFIED COMPONENT ]

Iomega Zip 100 Drive and Disk

100 MB removable magnetic cartridge system, 1994. This entry records a distinct product or well-defined family; differences among revisions and similarly named models are called out below.

Photograph of Iomega Zip 100 Drive and Disk
PHOTOGRAPH — Yuri Litvinenko / 30pin, CC BY 2.0 · FILE ON WIKIMEDIA COMMONS

MODEL IDENTIFICATION: Match the full model/part number, revision, and region to the item label and its manufacturer documentation. Where a family has multiple revisions, specifications below are not universal across the family.

Recorded specifications

Cataloged partIomega Zip 100 Drive and Disk
Era / family100 MB removable magnetic cartridge system, 1994
Key specifications100 MB nominal removable cartridge; parallel, SCSI, IDE and USB drive variants; disk is proprietary Zip media.
Interface / fitDrive interface and OS driver must match; cartridge is not a 3.5-inch floppy despite similar handling.
Variants / identificationZip 100, Zip 250 and Zip 750 are different drive/media generations with varying backward compatibility.
Archive recordRecord full part number, hardware revision, serial/date code, firmware/BIOS, accessories, physical condition, and the documentation revision used for verification.

Compatibility and handling

  • Confirm the complete part number, connector signal/pinout, supported host, dimensions, power, firmware and operating-system requirements before use.
  • Inspect for corrosion, cracked parts, bent pins, damaged insulation, failing bearings, leaking cells, or prior repair. Avoid powering unidentified or damaged hardware.
  • For compatibility claims, cite a specific manual, CPU support list, interface standard, or tested host configuration; physical fit alone is insufficient.
  • Record measurements with the test setup and instrument conditions; distinguish vendor maximums from measured or sustained results.

Model notes

Drive interface and OS driver must match; cartridge is not a 3.5-inch floppy despite similar handling.

Zip 100, Zip 250 and Zip 750 are different drive/media generations with varying backward compatibility.

Sources & further reading

  1. Manufacturer / standards documentation — Iomega Zip 100 Drive and DiskReference supplied for this specific model or standards family; verify full revision against the nameplate/manual.
  2. Manufacturer / standards documentation — Iomega Zip 100 Drive and DiskReference supplied for this specific model or standards family; verify full revision against the nameplate/manual.

Source links may describe a product family, not the exact board revision or region. The full model-specific manual/specification takes precedence.