[ POWER CONVERSION // IDENTIFIED MODEL ]
SilverStone SX700-PT (SST-SX700-PT)
SilverStone SX700-PT 700 W SFX-L power supply. This record is bounded to the named unit, standard revision, or model family below; nearby model names and replacement parts are not presumed equivalent.
HIGH-VOLTAGE SAFETY: Unplug before external inspection. Never open a power supply. Dangerous voltage can remain inside after it is disconnected. Do not attempt internal repair; use qualified service or replace the unit.
Verified identity & specifications
| Catalog identity | SilverStone SX700-PT 700 W SFX-L power supply |
|---|---|
| Form factor / era | SFX-L / high-output compact PSU |
| AC input | 90–264 V AC, 47–63 Hz; confirm revision label. |
| DC output rating | 700 W continuous; +12 V output up to 58.4 A (700 W class); check unit table for minor rails. |
| Mechanical envelope | 125 × 130 × 63.5 mm (W × D × H), SFX-L. |
| Connectors / interface | Fully modular 24-pin ATX, EPS/CPU, PCIe, SATA, peripheral; exact port map and included leads are in the manufacturer manual. |
| Revision differences | PT suffix denotes the Platinum SFX-L family; not dimensionally equivalent to 100 mm-deep SFX. Verify cable kit and revision before replacement. |
Compatibility & safe handling
- Match full model, suffix, region, revision and DC output label to the official documentation. Rated total watts alone do not establish rail or transient compatibility.
- Before replacement, confirm AC input range, rail current/combined limits, motherboard signaling and pinout, mechanical envelope, fasteners, cooling direction, and every required connector.
- Never open the PSU, defeat protective earth, or probe its internals. Do not energize a wet, cracked, corroded, burned, modified, or unidentified supply.
- Modular cable pinouts are not standardized at the PSU end. Use only cables expressly approved for this exact model/revision; matching plugs can have different wiring.
Model and revision notes
PT suffix denotes the Platinum SFX-L family; not dimensionally equivalent to 100 mm-deep SFX. Verify cable kit and revision before replacement.
SilverStone SX700-PT specification and manual; confirm form factor and dimensions before case-fit assumptions.
Archival notes
Record SFX-L depth and the exact SST model. Do not force an SFX supply into a longer SFX-L requirement or reuse another SilverStone PSU cable set.
Photograph the complete nameplate, assembly/model code, revision/date code, input selector if present, cable ends and mounting side. Separate observed label data from published specifications and preserve the referenced manual issue.
Manufacturer / standards references
- SilverStone SX700-PT specification and manualSilverStone SX700-PT specification and manual; confirm form factor and dimensions before case-fit assumptions.
- Intel — ATX / ATX12V Power Supply Design GuideStandards reference for the ATX electrical/mechanical family; use the revision specified for the product. Historical IBM supplies are not ATX and must not be adapted on this basis.
The exact nameplate and corresponding manufacturer manual remain controlling for regional and hardware revisions.