[ POWER CONVERSION // IDENTIFIED MODEL ]
SilverStone SX1000-LPT (SST-SX1000-LPT)
SilverStone SX1000-LPT 1000 W SFX-L Platinum PSU. This record applies only to the model and generation named here; similar wattage or connector shape does not establish equivalence.
HIGH-VOLTAGE WARNING: Disconnect mains before external inspection. Never open a PSU. Internal capacitors may retain lethal charge after unplugging. Do not probe or repair its interior; use qualified service or replace the unit.
Model-specific ratings & fit
| Manufacturer identity | SilverStone SX1000-LPT 1000 W SFX-L Platinum PSU |
|---|---|
| Form factor / generation | SFX-L / 1000 W Platinum |
| AC input | 90–264 V AC, 47–63 Hz; check model label. |
| DC output | 1000 W continuous; +12 V 83 A (996 W); minor-rail combined limits per SST-SX1000-LPT table. |
| Dimensions / mounting | 125 × 130 × 63.5 mm (W × D × H); SFX-L, 30 mm deeper than SFX. |
| Connectors | Fully modular 24-pin ATX, EPS, PCIe, SATA and peripheral; PSU-side wiring is not generic. |
| Revision distinctions | LPT identifies Platinum SFX-L product, distinct from SX1000 and SX1000-G. Verify the exact LPT revision and cable chart. |
Compatibility & safe installation
- Confirm complete model, suffix, region and revision against the unit nameplate and manufacturer manual. Do not substitute by wattage or connector-shell appearance.
- Verify AC range, per-rail and combined DC ratings, line derating, pinout, dimensions, cooling direction and qualified host support.
- Modular cables have model- and revision-specific PSU-side wiring. Use only approved leads for this exact PSU; a plug that fits may have a dangerous pinout mismatch.
- For redundant/hot-plug modules, follow the host service manual, redundancy requirements and supported replacement procedure. A server blind-mate module is not an ATX supply.
- Never open or probe a PSU. Retire damaged, wet, burnt, corroded, modified or unidentified units.
Revision & archival notes
LPT identifies Platinum SFX-L product, distinct from SX1000 and SX1000-G. Verify the exact LPT revision and cable chart.
Confirm 130 mm depth, mounting and airflow. Keep exact PSU and modular cable set together.
Archive the complete nameplate, part/spare number, manufacturing date/revision, region, connector/cable labels, mounting orientation, source document and its issue date. Separate label transcription from testing.
Manufacturer references
- SilverStone SX1000-LPT (SST-SX1000-LPT)SilverStone SX1000-LPT 1000 W SFX-L Platinum PSU. Use the exact product manual/system matrix; regional SKUs and later hardware revisions may differ.
- Intel ATX / ATX12V Power Supply Design GuideStandards reference for desktop ATX only. Server hot-swap and Flex Slot interfaces are proprietary and not interchangeable by generic ATX guidance.
Manufacturer label and applicable model/system manual take precedence over this summary.