ALIENCULTIST.COM
HARDWARE ARCHIVES // PSU MODEL

[ ATX DESKTOP POWER // IDENTIFIED MODEL ]

MSI MPG A850G PCIE5

An 850 W fully modular ATX model with an original PCIe 5.0-era 12VHPWR cable. The exact model is MPG A850G PCIE5; do not conflate it with MSI MAG A850GL PCIE5 or MPG A850G PCIE5 II revisions. Specifications below are manufacturer-source references; the physical unit’s nameplate and matching manual control.

Original local block schematic for MSI MPG A850G PCIE5; not to scale or a wiring pinout
ORIGINAL LOCAL SCHEMATIC // NOT TO SCALE // NOT A PINOUT

HIGH-VOLTAGE SAFETY: Disconnect AC before external inspection. Never open, probe, or repair a PSU internally; hazardous charge can persist after unplugging. Replace a damaged, wet, burnt, modified or unidentified unit, or use qualified service.

Model-specific specifications

Manufacturer / exact modelMSI MPG A850G PCIE5; model / SKU MPG A850G PCIE5. Match the complete regional suffix, hardware revision and label.
Rated capacity850 W continuous total output as the manufacturer-rated class; combined rail limits and operating-temperature derating remain model-specific.
Efficiency certification80 PLUS Gold, listed by the manufacturer for this named model. Certification does not identify an unknown PSU revision or establish used-unit condition.
AC input100–240 V AC, 12–6 A, 50–60 Hz; follow the unit label for region-specific current rating.
DC rails+12 V: 70.8 A (850 W); +3.3 V and +5 V: 20 A each, 100 W combined; −12 V: 0.3 A; +5 VSB: 3 A. Confirm the full combined-load table on the model label/manual.
Connector set24-pin ATX; two 4+4-pin EPS; one 16-pin 12VHPWR (600 W class); six PCIe 6+2-pin; eight SATA; four peripheral 4-pin; one FDD.
ATX / PCIe revisionATX12V 3.0 / PCIe 5.0 generation; native 12VHPWR is not the later 12V-2x6 interface.
Mechanical envelope150 × 150 × 86 mm (depth × width × height). Verify mounting holes, fan/grille clearance, cable exit/side-panel clearance and tolerance against the case drawing.
ProtectionsOCP, OVP, OPP, OTP, SCP and UVP. Protection labels do not guarantee a safe outcome under a fault; use only a healthy, unmodified unit within its documented ratings.

Compatibility & revision caveats

  • The included 12VHPWR lead and its insertion/bend limits are specific to the documented generation. Check connector seating, GPU input requirements, motherboard EPS needs, and the physical unit label. Never transfer modular leads between PSU families.
  • Confirm motherboard 24-pin and EPS count/pinout, GPU cable type, total power, rail limits, chassis dimensions, cooling clearance, region and full model suffix before purchase or installation.
  • Modular PSU-side pinouts are not standardized. A cable that physically fits is not evidence of electrical compatibility; use only leads explicitly approved for this exact model/revision.
  • ATX, ATX12V and PCIe connector revisions describe interfaces, not quality, safety certification or automatic compatibility with every PC component.

Manufacturer product and manual sources

  1. MSI MPG A850G PCIE5 specificationsMSI model specification page; verify the regional model listing and the exact PSU label.
  2. MSI MPG A850G / A1000G / A750G PCIE5 user manual (PDF)MSI installation and cable documentation for this named PCIE5 product family.

When a broad product-family page conflicts with a model-specific manual, label or cable table, the exact unit label and corresponding model documentation take precedence.