ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ POWER CONVERSION // IDENTIFIED MODEL ]

MSI MEG Ai1300P PCIE5

MSI MEG Ai1300P PCIE5 1300 W fully modular PSU. This record applies only to the model and generation named here; similar wattage or connector shape does not establish equivalence.

Original local block schematic for MSI MEG Ai1300P PCIE5, not a circuit or pinout
LOCAL ORIGINAL BLOCK SCHEMATIC // NOT TO SCALE

HIGH-VOLTAGE WARNING: Disconnect mains before external inspection. Never open a PSU. Internal capacitors may retain lethal charge after unplugging. Do not probe or repair its interior; use qualified service or replace the unit.

Model-specific ratings & fit

Manufacturer identityMSI MEG Ai1300P PCIE5 1300 W fully modular PSU
Form factor / generationATX 3.0 / PCIe 5.0, 1300 W
AC input100–240 V AC, 50–60 Hz, 10–5 A.
DC output+12 V 108.33 A / 1300 W; +3.3 V/+5 V up to 22 A each; −12 V 0.3 A; +5 VSB 3 A; check combined minor-rail limit.
Dimensions / mountingATX; 160 × 150 × 86 mm (D × W × H).
ConnectorsFully modular 24-pin ATX, EPS, PCIe 6+2, 12VHPWR-class GPU outputs/leads, SATA and peripheral; follow exact manual.
Revision distinctionsOriginal Ai1300P PCIE5 is ATX 3.0/12VHPWR era, not a later ATX 3.1 model. Seat GPU plugs fully and follow bend-clearance advice.

Compatibility & safe installation

  • Confirm complete model, suffix, region and revision against the unit nameplate and manufacturer manual. Do not substitute by wattage or connector-shell appearance.
  • Verify AC range, per-rail and combined DC ratings, line derating, pinout, dimensions, cooling direction and qualified host support.
  • Modular cables have model- and revision-specific PSU-side wiring. Use only approved leads for this exact PSU; a plug that fits may have a dangerous pinout mismatch.
  • For redundant/hot-plug modules, follow the host service manual, redundancy requirements and supported replacement procedure. A server blind-mate module is not an ATX supply.
  • Never open or probe a PSU. Retire damaged, wet, burnt, corroded, modified or unidentified units.

Revision & archival notes

Original Ai1300P PCIE5 is ATX 3.0/12VHPWR era, not a later ATX 3.1 model. Seat GPU plugs fully and follow bend-clearance advice.

Record regional label, cables and MSI specification/manual revision; package connector population can vary.

Archive the complete nameplate, part/spare number, manufacturing date/revision, region, connector/cable labels, mounting orientation, source document and its issue date. Separate label transcription from testing.

Manufacturer references

  1. MSI MEG Ai1300P PCIE5MSI MEG Ai1300P PCIE5 1300 W fully modular PSU. Use the exact product manual/system matrix; regional SKUs and later hardware revisions may differ.
  2. Intel ATX / ATX12V Power Supply Design GuideStandards reference for desktop ATX only. Server hot-swap and Flex Slot interfaces are proprietary and not interchangeable by generic ATX guidance.

Manufacturer label and applicable model/system manual take precedence over this summary.