[ POWER CONVERSION // IDENTIFIED MODEL ]
FSP FSP300-60GHT 300 W TFX
FSP Group FSP300-60GHT, TFX 300 W OEM PSU model. This record is bounded to the named unit, standard revision, or model family below; nearby model names and replacement parts are not presumed equivalent.
HIGH-VOLTAGE SAFETY: Unplug before external inspection. Never open a power supply. Dangerous voltage can remain inside after it is disconnected. Do not attempt internal repair; use qualified service or replace the unit.
Verified identity & specifications
| Catalog identity | FSP Group FSP300-60GHT, TFX 300 W OEM PSU model |
|---|---|
| Form factor / era | TFX12V / OEM 300 W |
| AC input | 100–240 V AC, 50/60 Hz (SKU label is authoritative). |
| DC output rating | 300 W rated class; exact DC output/combined rail limits vary by datasheet issue and label; do not calculate them from nominal watts. |
| Mechanical envelope | TFX envelope, approx. 175 × 85 × 65 mm; verify the exact drawing and mounting tabs for the 60GHT suffix. |
| Connectors / interface | OEM fixed motherboard, CPU, SATA/peripheral leads; connector count and harness length can be OEM-specific. |
| Revision differences | FSP300-60GHT suffixes and customer/OEM revisions can change wiring, fan, and harness. The bare model string alone is insufficient for replacement. |
Compatibility & safe handling
- Match full model, suffix, region, revision and DC output label to the official documentation. Rated total watts alone do not establish rail or transient compatibility.
- Before replacement, confirm AC input range, rail current/combined limits, motherboard signaling and pinout, mechanical envelope, fasteners, cooling direction, and every required connector.
- Never open the PSU, defeat protective earth, or probe its internals. Do not energize a wet, cracked, corroded, burned, modified, or unidentified supply.
- Modular cable pinouts are not standardized at the PSU end. Use only cables expressly approved for this exact model/revision; matching plugs can have different wiring.
Model and revision notes
FSP300-60GHT suffixes and customer/OEM revisions can change wiring, fan, and harness. The bare model string alone is insufficient for replacement.
FSP Group PC PSU catalogue/datasheet source; locate FSP300-60GHT and compare the nameplate/revision with OEM system documentation.
Archival notes
Record OEM customer label, FSP model suffix, date code, and wiring harness. Do not assume an OEM FSP unit has retail-model connectors or current limits.
Photograph the complete nameplate, assembly/model code, revision/date code, input selector if present, cable ends and mounting side. Separate observed label data from published specifications and preserve the referenced manual issue.
Manufacturer / standards references
- FSP Group PC PSU catalogue/datasheet sourceFSP Group PC PSU catalogue/datasheet source; locate FSP300-60GHT and compare the nameplate/revision with OEM system documentation.
- Intel — ATX / ATX12V Power Supply Design GuideStandards reference for the ATX electrical/mechanical family; use the revision specified for the product. Historical IBM supplies are not ATX and must not be adapted on this basis.
The exact nameplate and corresponding manufacturer manual remain controlling for regional and hardware revisions.