[ POWER CONVERSION // IDENTIFIED MODEL ]
EVGA SuperNOVA 1600 T2 (220-T2-1600-X1)
EVGA SuperNOVA 1600 T2, part 220-T2-1600-X1. This record applies only to the model and generation named here; similar wattage or connector shape does not establish equivalence.
HIGH-VOLTAGE WARNING: Disconnect mains before external inspection. Never open a PSU. Internal capacitors may retain lethal charge after unplugging. Do not probe or repair its interior; use qualified service or replace the unit.
Model-specific ratings & fit
| Manufacturer identity | EVGA SuperNOVA 1600 T2, part 220-T2-1600-X1 |
|---|---|
| Form factor / generation | ATX 12 V 2.4 / EPS 2.92, 1600 W Titanium |
| AC input | 100–240 V AC, 50–60 Hz, 15–8 A; see nameplate. |
| DC output | +12 V 133.3 A; +3.3 V/+5 V 24 A each; −12 V 0.5 A; +5 VSB 3 A; 1600 W total. |
| Dimensions / mounting | 220 × 150 × 86 mm (L × W × H); long ATX supply. |
| Connectors | Fully modular 24-pin, dual EPS, PCIe 6+2, SATA, PATA and floppy per the EVGA SKU manual. |
| Revision distinctions | T2 is not P2/G2 or later SuperNOVA. ATX 2.4 generation; no native ATX 3.x GPU connector. Proprietary modular cabling. |
Compatibility & safe installation
- Confirm complete model, suffix, region and revision against the unit nameplate and manufacturer manual. Do not substitute by wattage or connector-shell appearance.
- Verify AC range, per-rail and combined DC ratings, line derating, pinout, dimensions, cooling direction and qualified host support.
- Modular cables have model- and revision-specific PSU-side wiring. Use only approved leads for this exact PSU; a plug that fits may have a dangerous pinout mismatch.
- For redundant/hot-plug modules, follow the host service manual, redundancy requirements and supported replacement procedure. A server blind-mate module is not an ATX supply.
- Never open or probe a PSU. Retire damaged, wet, burnt, corroded, modified or unidentified units.
Revision & archival notes
T2 is not P2/G2 or later SuperNOVA. ATX 2.4 generation; no native ATX 3.x GPU connector. Proprietary modular cabling.
Preserve exact EVGA code/revision and supplied cable set; EVGA modular socket similarity is not cable compatibility.
Archive the complete nameplate, part/spare number, manufacturing date/revision, region, connector/cable labels, mounting orientation, source document and its issue date. Separate label transcription from testing.
Manufacturer references
- EVGA SuperNOVA 1600 T2 (220-T2-1600-X1)EVGA SuperNOVA 1600 T2, part 220-T2-1600-X1. Use the exact product manual/system matrix; regional SKUs and later hardware revisions may differ.
- Intel ATX / ATX12V Power Supply Design GuideStandards reference for desktop ATX only. Server hot-swap and Flex Slot interfaces are proprietary and not interchangeable by generic ATX guidance.
Manufacturer label and applicable model/system manual take precedence over this summary.