[ POWER CONVERSION // IDENTIFIED MODEL ]
Corsair RM750e (2023), CP-9020262
Corsair RMe Series RM750e, 2023 750 W model CP-9020262. This record is bounded to the named unit, standard revision, or model family below; nearby model names and replacement parts are not presumed equivalent.
HIGH-VOLTAGE SAFETY: Unplug before external inspection. Never open a power supply. Dangerous voltage can remain inside after it is disconnected. Do not attempt internal repair; use qualified service or replace the unit.
Verified identity & specifications
| Catalog identity | Corsair RMe Series RM750e, 2023 750 W model CP-9020262 |
|---|---|
| Form factor / era | ATX 3.0 / PCIe 5.0-era ATX |
| AC input | 100–240 V AC, 50/60 Hz (check regional product manual and nameplate). |
| DC output rating | 750 W continuous; +12 V 62.5 A (750 W); +3.3 V/+5 V each 20 A with 150 W combined; −12 V 0.3 A; +5 VSB 3 A. |
| Mechanical envelope | 140 × 150 × 86 mm (L × W × H), ATX. |
| Connectors / interface | Fully modular 24-pin ATX, 2× 4+4-pin EPS12V, 4× 6+2-pin PCIe, SATA/peripheral; native GPU lead/connector population is SKU/revision-specific—confirm CP-9020262 manual before use. |
| Revision differences | Not interchangeable with similarly named older RMe/RM-series variants. The 2023 RMe SKU is ATX 3.0 generation; do not assume later RM750e labels/cables match this one. |
Compatibility & safe handling
- Match full model, suffix, region, revision and DC output label to the official documentation. Rated total watts alone do not establish rail or transient compatibility.
- Before replacement, confirm AC input range, rail current/combined limits, motherboard signaling and pinout, mechanical envelope, fasteners, cooling direction, and every required connector.
- Never open the PSU, defeat protective earth, or probe its internals. Do not energize a wet, cracked, corroded, burned, modified, or unidentified supply.
- Modular cable pinouts are not standardized at the PSU end. Use only cables expressly approved for this exact model/revision; matching plugs can have different wiring.
Model and revision notes
Not interchangeable with similarly named older RMe/RM-series variants. The 2023 RMe SKU is ATX 3.0 generation; do not assume later RM750e labels/cables match this one.
Corsair CP-9020262 product and downloads page; use its RM750e manual for cable count, regional variations, and exact connector assignment.
Archival notes
Capture CP-9020262 suffix/region, hardware revision, serial/date code, cable labels, and downloaded manual revision. Never reuse modular cables from another PSU even if they fit.
Photograph the complete nameplate, assembly/model code, revision/date code, input selector if present, cable ends and mounting side. Separate observed label data from published specifications and preserve the referenced manual issue.
Manufacturer / standards references
- Corsair CP-9020262 product and downloads pageCorsair CP-9020262 product and downloads page; use its RM750e manual for cable count, regional variations, and exact connector assignment.
- Intel — ATX / ATX12V Power Supply Design GuideStandards reference for the ATX electrical/mechanical family; use the revision specified for the product. Historical IBM supplies are not ATX and must not be adapted on this basis.
The exact nameplate and corresponding manufacturer manual remain controlling for regional and hardware revisions.