ALIENCULTIST.COM
HARDWARE ARCHIVES // PSU MODEL

[ ATX DESKTOP POWER // IDENTIFIED MODEL ]

be quiet! STRAIGHT POWER 12 850W

850 W be quiet! Straight Power 12, article BN337; this is separate from the 1000 W Straight Power 12 record and earlier Straight Power generations. Specifications below are manufacturer-source references; the physical unit’s nameplate and matching manual control.

Original local block schematic for be quiet! STRAIGHT POWER 12 850W; not to scale or a wiring pinout
ORIGINAL LOCAL SCHEMATIC // NOT TO SCALE // NOT A PINOUT

HIGH-VOLTAGE SAFETY: Disconnect AC before external inspection. Never open, probe, or repair a PSU internally; hazardous charge can persist after unplugging. Replace a damaged, wet, burnt, modified or unidentified unit, or use qualified service.

Model-specific specifications

Manufacturer / exact modelbe quiet! STRAIGHT POWER 12 850W; model / SKU BN337. Match the complete regional suffix, hardware revision and label.
Rated capacity850 W continuous total output as the manufacturer-rated class; combined rail limits and operating-temperature derating remain model-specific.
Efficiency certification80 PLUS Platinum, listed by the manufacturer for this named model. Certification does not identify an unknown PSU revision or establish used-unit condition.
AC input100–240 V AC, 50–60 Hz; verify regional current rating on the nameplate.
DC rails+12 V: single rail, up to 70.8 A / 850 W; +3.3 V and +5 V: 25 A each, combined limit per BN337 output table; −12 V and +5 VSB per the model label.
Connector set24-pin ATX; two EPS/CPU 4+4-pin; one native 12V-2x6 16-pin; four PCIe 6+2-pin; nine SATA; two Molex 4-pin. Use BN337’s official cable assignment sheet for cable layout.
ATX / PCIe revisionATX 3.1 / PCIe 5.1 revision.
Mechanical envelope180 × 150 × 86 mm (depth × width × height). Verify mounting holes, fan/grille clearance, cable exit/side-panel clearance and tolerance against the case drawing.
ProtectionsOCP, OVP, UVP, SCP, OPP and OTP. Protection labels do not guarantee a safe outcome under a fault; use only a healthy, unmodified unit within its documented ratings.

Compatibility & revision caveats

  • The 12V-2x6 connector, native lead and 6+2-pin leads have separate use limits. Keep modular cables tied to BN337’s approved cable list; verify PSU depth, GPU cable bend room, and the label-specific rail table.
  • Confirm motherboard 24-pin and EPS count/pinout, GPU cable type, total power, rail limits, chassis dimensions, cooling clearance, region and full model suffix before purchase or installation.
  • Modular PSU-side pinouts are not standardized. A cable that physically fits is not evidence of electrical compatibility; use only leads explicitly approved for this exact model/revision.
  • ATX, ATX12V and PCIe connector revisions describe interfaces, not quality, safety certification or automatic compatibility with every PC component.

Manufacturer product and manual sources

  1. be quiet! STRAIGHT POWER 12 850W product pageManufacturer product page for BN337 and the 850 W model.
  2. be quiet! BN337 downloads and manualManufacturer product download page for model documentation; confirm the article number before downloading.

When a broad product-family page conflicts with a model-specific manual, label or cable table, the exact unit label and corresponding model documentation take precedence.