[ POWER CONVERSION // IDENTIFIED ASUS MODEL ]
ASUS TUF Gaming 750W Gold
This record covers the manufacturer-listed model TUF Gaming 750W Gold only. Do not treat same-family wattage variants, suffixes, regional assemblies or revisions as interchangeable.
HIGH-VOLTAGE SAFETY: Disconnect mains before external inspection. Never open or probe a PSU. Internal capacitors may retain hazardous charge after disconnection. Use qualified service or replace the complete unit.
Model-specific input & output specifications
| Manufacturer model | ASUS TUF Gaming 750W Gold | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Form factor / ATX generation | ATX12V; ATX 3.1 | ||||||||||||||||||
| Efficiency class / protection | 80 PLUS Gold; ASUS lists OPP, OVP, UVP, SCP, OCP and OTP. | ||||||||||||||||||
| AC input | 100–240 V AC; ASUS does not publish line frequency or maximum input current on this specifications page—check the unit nameplate and regional manual. | ||||||||||||||||||
| Total DC output | 750 W maximum total output as listed by ASUS. Per-rail ceilings and combined limits are in the table below. | ||||||||||||||||||
| Rail ratings |
| ||||||||||||||||||
| Connector inventory | MB 24/20-pin ×1; CPU 4+4-pin ×2; PCI-E 16-pin ×1 (ASUS lists PSU-side and component-side ends); PCI-E 8-pin ×3; SATA ×5; peripheral ×4. | ||||||||||||||||||
| Dimensions | 150 × 150 × 86 mm (manufacturer dimensions; verify orientation and chassis clearance). | ||||||||||||||||||
| Catalog scope | Manufacturer model identity is the ASUS specification-page model name; match the unit label and correct regional manual before installation. |
Compatibility & safe handling
- This Gold model has a listed 16-pin PCI-E connection; its exact cable type and endpoints should be checked against the ASUS 750W Gold manual. Do not substitute 750W Bronze cable assumptions or another model’s detachable leads.
- Check motherboard ATX and CPU EPS requirements, GPU connector type and current rating, total system demand, chassis envelope, airflow, screw pattern and cable bend room; the ATX exterior alone does not prove electrical or mechanical fit.
- Use only detachable PSU cables documented for this exact model. Modular-side pinouts are not standardized, including within one manufacturer’s product family; never swap leads based on connector shape alone.
- Check the actual nameplate for mains frequency, maximum line current and regional certification. Do not operate outside its AC input rating or use a damaged, wet, modified or unidentified supply.
- Do not use unapproved adapters to create a different GPU input. Follow the graphics-card maker’s cabling and clearance requirements and this PSU’s ASUS manual.
- Never open the supply, test internal circuitry or handle internal capacitors. Replace a suspect PSU as a unit or refer it to qualified service.
Revision & documentation notes
This Gold model has a listed 16-pin PCI-E connection; its exact cable type and endpoints should be checked against the ASUS 750W Gold manual. Do not substitute 750W Bronze cable assumptions or another model’s detachable leads. Manufacturer specifications are family references; verify the full model marking, local market version and any revision label on the physical PSU. ASUS may revise product documentation; use the manual corresponding to the exact product listing rather than a similarly named wattage model.
Manufacturer sources
- ASUS official product page: ASUS TUF Gaming 750W GoldPrimary manufacturer model page. Confirm product identity and the available regional support information.
- ASUS official technical specifications: TUF Gaming 750W GoldModel-specific AC input range, DC rail ceilings, combined outputs, connector inventory, dimensions and stated ATX standard.
- ASUS official manual download/support page: TUF Gaming 750W GoldManufacturer support lookup for the product’s manual and installation guidance; confirm the matching model/region before use.
Where this summary and the physical unit label or correct ASUS manual differ, stop and resolve the model/revision before connecting equipment.