ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ POWER CONVERSION // IDENTIFIED ASUS MODEL ]

ASUS TUF Gaming 1000P

This record covers the manufacturer-listed model TUF-GAMING-1000P only. Do not treat same-family wattage variants, suffixes, regional assemblies or revisions as interchangeable.

Original local block schematic for ASUS TUF Gaming 1000P; not a service circuit or connector pinout
LOCAL ORIGINAL BLOCK SCHEMATIC // NOT TO SCALE

HIGH-VOLTAGE SAFETY: Disconnect mains before external inspection. Never open or probe a PSU. Internal capacitors may retain hazardous charge after disconnection. Use qualified service or replace the complete unit.

Model-specific input & output specifications

Manufacturer modelASUS TUF-GAMING-1000P
Form factor / ATX generationATX12V; ATX 3.1
Efficiency class / protection80 PLUS Platinum; ASUS lists OPP, OVP, UVP, SCP, OCP and OTP.
AC input100–240 V AC; ASUS does not publish line frequency or maximum input current on this specifications page—check the unit nameplate and regional manual.
Total DC output1000 W maximum total output as listed by ASUS. Per-rail ceilings and combined limits are in the table below.
Rail ratings
DC railMaximum loadCombined / rail limit
+3.3 V25 A125 W combined with +5 V
+5 V25 A125 W combined with +3.3 V
+12 V83.3 A1000 W
−12 V0.3 A3.6 W
+5 VSB3 A15 W
Connector inventoryMB 20+4-pin ×1; CPU 4+4-pin ×2; PCI-E 16-pin 12V-2x6 ×1; PCI-E 6+2-pin ×3; SATA ×6; peripheral ×3.
Dimensions150 × 150 × 86 mm (manufacturer dimensions; verify orientation and chassis clearance).
Catalog scopeManufacturer model identity is the ASUS specification-page model name; match the unit label and correct regional manual before installation.

Compatibility & safe handling

  • Do not confuse TUF-GAMING-1000P (Platinum, one 12V-2x6 16-pin connector) with the 1000W Gold model. Match the cable set and connector arrangement to the exact product/manual.
  • Check motherboard ATX and CPU EPS requirements, GPU connector type and current rating, total system demand, chassis envelope, airflow, screw pattern and cable bend room; the ATX exterior alone does not prove electrical or mechanical fit.
  • Use only detachable PSU cables documented for this exact model. Modular-side pinouts are not standardized, including within one manufacturer’s product family; never swap leads based on connector shape alone.
  • Check the actual nameplate for mains frequency, maximum line current and regional certification. Do not operate outside its AC input rating or use a damaged, wet, modified or unidentified supply.
  • Do not use unapproved adapters to create a different GPU input. Follow the graphics-card maker’s cabling and clearance requirements and this PSU’s ASUS manual.
  • Never open the supply, test internal circuitry or handle internal capacitors. Replace a suspect PSU as a unit or refer it to qualified service.

Revision & documentation notes

Do not confuse TUF-GAMING-1000P (Platinum, one 12V-2x6 16-pin connector) with the 1000W Gold model. Match the cable set and connector arrangement to the exact product/manual. Manufacturer specifications are family references; verify the full model marking, local market version and any revision label on the physical PSU. ASUS may revise product documentation; use the manual corresponding to the exact product listing rather than a similarly named wattage model.

Manufacturer sources

  1. ASUS official product page: ASUS TUF Gaming 1000PPrimary manufacturer model page. Confirm product identity and the available regional support information.
  2. ASUS official technical specifications: TUF-GAMING-1000PModel-specific AC input range, DC rail ceilings, combined outputs, connector inventory, dimensions and stated ATX standard.
  3. ASUS official manual download/support page: TUF-GAMING-1000PManufacturer support lookup for the product’s manual and installation guidance; confirm the matching model/region before use.

Where this summary and the physical unit label or correct ASUS manual differ, stop and resolve the model/revision before connecting equipment.