[ POWER CONVERSION // IDENTIFIED MODEL ]
ASUS ROG Loki 1000P SFX-L Platinum
Model-specific catalog entry for manufacturer identifier ROG-LOKI-1000P-SFX-L-GAMING. Verify the entire printed model, suffix, hardware revision and region on the physical unit before selecting or servicing it.
HIGH-VOLTAGE SAFETY: Disconnect mains before external inspection. Never open or probe a PSU; dangerous voltage can remain after unplugging. Replace damaged, wet, burned, modified or unidentified units as complete assemblies or use qualified service.
Model-specific input, output & fit
| Manufacturer model / SKU | ASUS ROG Loki 1000P SFX-L Platinum; ROG-LOKI-1000P-SFX-L-GAMING. Regional suffix or revision must match the physical label. | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Form factor / efficiency / generation | SFX-L; 80 PLUS Platinum; ATX 3.0 / PCIe 5.0. Form factor is not proof of electrical compatibility. | ||||||||||||||||||
| AC input | 100–240 V AC; confirm frequency and rated line current on the regional unit label/manual. | ||||||||||||||||||
| Maximum DC output | 1000 W total continuous-output class as published by the manufacturer. A total wattage rating does not replace per-rail/combined limits or label verification. | ||||||||||||||||||
| DC output rails |
| ||||||||||||||||||
| Output connectors / cables | Fully modular: ATX motherboard 24-pin ×1; CPU/EPS 4+4-pin ×2; PCIe 16-pin GPU cable ×1; PCIe 6+2-pin ×6; SATA ×12; peripheral 4-pin ×4; floppy ×1. Confirm included cable labels and exact regional bundle against ASUS documentation. | ||||||||||||||||||
| Mechanical envelope | 125 × 125 × 63.5 mm (SFX-L; width × depth × height). Confirm screw points, inlet/fan orientation, airflow, clearance and tolerance against the case drawing; do not force-fit. | ||||||||||||||||||
| Protection / limits | Over-current, over-voltage, under-voltage, over-power, short-circuit and thermal protections are model/revision specific. Use the correct manual; do not test protections or probe inside the unit. |
Electrical compatibility & safe installation
- Check the SFX-L depth and airflow envelope before ordering. A 1000 W nameplate does not guarantee compatibility with a particular system: verify the motherboard/EPS input, GPU cable type and transient requirements, branch circuit, and all rail limits. Use only cables listed for ROG Loki 1000P; PSU-side modular wiring is not standardized.
- Confirm the AC mains supply is within the PSU input range and the region’s plug/cord/circuit requirements. Stop if the nameplate differs from this reference.
- Check ATX motherboard, EPS CPU and GPU requirements, individual/combined rail ratings, total demand, transient excursions, thermal environment and case mounting separately; connector shape or nominal wattage alone does not establish suitability.
- PSU-side modular pinouts are not standardized. Never transfer, splice, repin or adapt detachable cables unless the manufacturer explicitly approves the exact cable for this exact model and revision.
- When using a high-current 16-pin GPU cable, follow PSU and GPU manufacturer seating, bend-radius, clearance and load guidance. Do not energize a connector that is loose, visibly damaged, overheated or under side pressure.
- Do not open, repair, or electrically probe the PSU. Isolate power and replace a suspect unit; qualified technicians must follow the correct model-specific procedure.
Revision and sourcing notes
This entry describes only the listed SKU/model family. Manufacturers may change bundles, electrical tables, regional input ratings or cable generations without changing the marketing name. Verify the exact unit label and matching documentation; if any rating or connector count differs, use that exact manual/nameplate and do not install by assumption.
Published ratings describe a new compliant product, not the condition or remaining life of a used unit.
Manufacturer sources & standards
- ASUS ROG official product pageManufacturer product identity, nominal power, form factor and model-specific features. Match the printed SKU/revision on the unit.
- ASUS ROG official specifications / documentationManufacturer source for the electrical ratings, connector bundle, dimensions and installation constraints; open the edition matching the exact model and market.
- ASUS ROG further official referenceAdditional manufacturer source or technical guidance. If a referenced document is a product-specific manual, its instructions and unit label govern.
- Intel ATX desktop PSU design guideCompatibility context for standard ATX-family systems only; this document does not validate a specific cable pinout or proprietary interface.
Standards references apply only to the interface they cover. Model-specific manufacturer manual and unit label control installation; this reference is not a service procedure, certification, or pinout.