[ RACKMOUNT LINE CONDITIONER // EXACT MODEL ]
Furman PL-PLUS C
15 A rack conditioner with eight isolated rear outlets, voltage monitoring, SMP surge protection, LiFT filtering and EVS; no AVR or battery.
ARCHIVAL IDENTIFICATION: Preserve exact model and regional suffix, nameplate, serial/date code, outlet map, manual revision and observed condition. Similar product-family names do not prove electrical equivalence.
Model specifications
| Manufacturer / exact model SKU | Furman PL-PLUS C. Verify full regional suffix and revision from the physical nameplate. |
|---|---|
| Catalog category / topology | Line conditioners — rackmount AC conditioner. No battery or stored-energy backup. |
| Input voltage / supported range | 120 V AC nominal North American supply; no voltage-regulation range is specified because this conditioner does not regulate line voltage. |
| Output voltage / range | Nominal 120 V AC pass-through; voltage tracks the source within its operating conditions. |
| Capacity / current | 15 A aggregate load rating. |
| Regulation / conditioning functions | SMP surge protection, LiFT AC-noise filtering and EVS shutdown; 20-segment tri-color AC voltmeter monitors input voltage. No AVR. |
| Outlets / connectors | Eight rear-panel AC outlets in isolated banks; front-panel USB convenience charging is not an AC receptacle. |
| Response / continuity | Continuous filtering/pass-through; no voltage-correction or battery-transfer delay. Manufacturer summary does not state suppression response timing. No outage runtime. |
| Compatibility | Grounded 120 V rack equipment up to 15 A aggregate. Check each isolated bank and attached equipment load; not a stabilizer, isolation transformer or UPS. |
| Electrical safety / installation limits | Use a properly grounded circuit and respect the 15 A total rating. Do not exceed outlet-bank limits or daisy-chain power strips. Preserve earth continuity; use meter only as an indication, not a wiring-safety test. |
Service and archival notes
- Record the AC source, loaded current, connected equipment, observed voltage and test conditions separately from manufacturer-rated values.
- This is a conditioning/distribution appliance, not a UPS: it cannot maintain output through a mains interruption.
- Never open energized mains equipment. Quarantine units with damaged cords, overheated connectors, compromised enclosure or grounding, or evidence of liquid ingress.
- Use the exact regional manual/nameplate for connector, branch-circuit, mounting, grounding and load requirements; this static record is not an installation approval.
Manufacturer sources and manual
- Furman manufacturer product page — PL-PLUS CProduct-family overview and manufacturer-stated functions. Confirm the complete model label and regional variant.
- Furman official operating manual — PL-PLUS CManufacturer instructions for ratings, connections, operation and electrical safety.
- Furman official datasheet — PL-PLUS CManufacturer model specifications; ratings and feature details are revision-sensitive.