[ RACKMOUNT LINE CONDITIONER // EXACT MODEL ]
Furman M-8x²
Nine-outlet 15 A rack conditioner providing switched distribution, standard surge/spike protection and RFI/EMI filtering; no voltage regulation or backup battery.
ARCHIVAL IDENTIFICATION: Preserve exact model and regional suffix, nameplate, serial/date code, outlet map, manual revision and observed condition. Similar product-family names do not prove electrical equivalence.
Model specifications
| Manufacturer / exact model SKU | Furman M-8x². Verify full regional suffix and revision from the physical nameplate. |
|---|---|
| Catalog category / topology | Line conditioners — rackmount AC conditioner. No battery or stored-energy backup. |
| Input voltage / supported range | 120 V AC nominal North American supply; no voltage-regulation range is specified because this model does not regulate line voltage. |
| Output voltage / range | Nominal 120 V AC pass-through; voltage follows the input. |
| Capacity / current | 15 A aggregate input/load rating. |
| Regulation / conditioning functions | Standard surge/spike protection and RFI/EMI line-noise filtration. No AVR; model omits rack lights. |
| Outlets / connectors | Nine total: eight switched rear outlets and one front convenience outlet. |
| Response / continuity | Continuous pass-through/filtration; no correction or transfer time applies, and surge-response timing is not stated in the cited summary. No battery. |
| Compatibility | Grounded 120 V rack equipment within the shared 15 A total load; not for 230 V equipment, regulated-voltage requirements or outage ride-through. |
| Electrical safety / installation limits | Use a grounded 15 A circuit, keep combined load within rating and preserve protective earth. Maintain clearance and inspect the power cord and outlet contacts. Do not cascade strips. |
Service and archival notes
- Record the AC source, loaded current, connected equipment, observed voltage and test conditions separately from manufacturer-rated values.
- This is a conditioning/distribution appliance, not a UPS: it cannot maintain output through a mains interruption.
- Never open energized mains equipment. Quarantine units with damaged cords, overheated connectors, compromised enclosure or grounding, or evidence of liquid ingress.
- Use the exact regional manual/nameplate for connector, branch-circuit, mounting, grounding and load requirements; this static record is not an installation approval.
Manufacturer sources and manual
- Furman manufacturer product page — M-8x²Product-family overview and manufacturer-stated functions. Confirm the complete model label and regional variant.
- Furman official operating manual — M-8x²Manufacturer instructions for ratings, connections, operation and electrical safety.
- Furman official datasheet — M-8x²Manufacturer model specifications; ratings and feature details are revision-sensitive.