ALIENCULTIST.COM
HARDWARE ARCHIVES // MODEL RECORD

[ RACKMOUNT LINE CONDITIONER // EXACT MODEL ]

Furman M-8Lx

Merit-series 15 A rack conditioner with nine outlets, noise filtration, surge protection and pull-out rack lights; it does not regulate voltage or provide battery backup.

Original functional line-conditioning schematic for Furman M-8Lx; not an installation diagram
ORIGINAL LOCAL FUNCTIONAL SCHEMATIC // NOT TO SCALE

ARCHIVAL IDENTIFICATION: Preserve exact model and regional suffix, nameplate, serial/date code, outlet map, manual revision and observed condition. Similar product-family names do not prove electrical equivalence.

Model specifications

Manufacturer / exact model SKUFurman M-8Lx. Verify full regional suffix and revision from the physical nameplate.
Catalog category / topologyLine conditioners — rackmount AC conditioner; automatic voltage regulator. No battery or stored-energy backup.
Input voltage / supported range120 V AC nominal North American supply; no voltage-regulation capture range is specified because this conditioner does not regulate voltage.
Output voltage / rangeNominal 120 V AC pass-through, tracking the source line.
Capacity / current15 A aggregate input/load rating.
Regulation / conditioning functionsStandard surge/spike protection and RFI/EMI noise filtration; dual pull-out rack lights. No AVR.
Outlets / connectorsNine total: eight switched rear outlets and one front convenience outlet.
Response / continuityContinuous pass-through/filtering with no voltage-correction or transfer event; suppression response timing is not stated in the cited summary. No battery backup.
CompatibilityGrounded 120 V rack equipment with aggregate current no greater than 15 A. This is distribution/conditioning, not voltage stabilization, isolation or UPS support.
Electrical safety / installation limitsGrounded supply required. Observe 15 A total limit, keep vents unobstructed and replace damaged cords/receptacles rather than using them. Do not defeat protective earth or daisy-chain strips.

Service and archival notes

  • Record the AC source, loaded current, connected equipment, observed voltage and test conditions separately from manufacturer-rated values.
  • This is a conditioning/distribution appliance, not a UPS: it cannot maintain output through a mains interruption.
  • Never open energized mains equipment. Quarantine units with damaged cords, overheated connectors, compromised enclosure or grounding, or evidence of liquid ingress.
  • Use the exact regional manual/nameplate for connector, branch-circuit, mounting, grounding and load requirements; this static record is not an installation approval.

Manufacturer sources and manual

  1. Furman manufacturer product page — M-8LxProduct-family overview and manufacturer-stated functions. Confirm the complete model label and regional variant.
  2. Furman official operating manual — M-8LxManufacturer instructions for ratings, connections, operation and electrical safety.
  3. Furman official datasheet — M-8LxManufacturer model specifications; ratings and feature details are revision-sensitive.