[ ONLINE DOUBLE-CONVERSION UPS // IDENTIFIED MODEL ]
9SX 3000i
3000 VA / 2700 W, 230 V online UPS. Eight IEC C13 and two IEC C19 outputs for specified 9SX configuration. This record describes the named regional model only. Variants and accessories must be matched against the complete product label and manufacturer documentation.
ARCHIVAL IDENTIFICATION: Preserve the complete SKU, region, serial/date code, hardware/firmware revision, installed options and observed condition. Similar names do not establish electrical equivalence.
Exact model specifications
| Catalog category / topology | Online UPS — Online double-conversion UPS. |
|---|---|
| Electrical ratings | 3000 VA / 2700 W, 230 V online UPS. |
| Receptacles / connectors | Eight IEC C13 and two IEC C19 outputs for specified 9SX configuration. |
| Battery / replacement / hot-swap | This UPS contains a sealed lead-acid battery; replace only with the exact manufacturer-approved part using the model-specific service procedure. Hot-swap is not assumed unless the manual permits it. LCD, USB/serial, optional network card; hot-swappable sealed lead-acid battery and supported external packs. Check rack/tower airflow and suffix. |
| Runtime / operating conditions | Use the manufacturer runtime curve at measured output watts with a fully charged, serviceable battery. Runtime varies with load/power factor, battery age and condition, charge state and ambient temperature; record these conditions for each test. |
| Network / monitoring interface | Model-specific local LCD/LED and/or USB/serial host signaling as identified in the model note; no native network management is assumed unless an optional supported network card is installed. |
| Electrical compatibility | LCD, USB/serial, optional network card; hot-swappable sealed lead-acid battery and supported external packs. Check rack/tower airflow and suffix. |
| Warnings / revision controls | LCD, USB/serial, optional network card; hot-swappable sealed lead-acid battery and supported external packs. Check rack/tower airflow and suffix. Verify complete suffix, electrical ratings, connectors, firmware/manual revision and regional certification against the actual nameplate before connecting equipment. |
Service and archival notes
- Photograph the nameplate, inlet/outlet map, serial/date code, status indicators and accessories; record load, input, environment and test date separately from manufacturer ratings.
- Do not infer runtime from a no-load self-test. Check battery age, alarms and condition; a replace-battery indicator or failed capacity test means runtime is unverified.
- Never open energized mains equipment. Do not energize cracked enclosures, damaged cords, overheated connectors, compromised grounding or swollen/leaking batteries.
- LCD, USB/serial, optional network card; hot-swappable sealed lead-acid battery and supported external packs. Check rack/tower airflow and suffix.
Manufacturer sources and manual
- Eaton manufacturer product search — 9SX 3000iFind the manufacturer’s specification sheet for the exact named model and regional SKU.
- Eaton manuals / support libraryUse the user guide, service and safety instructions matching the label and revision. This static archive does not replace manufacturer documentation.