[ NETWORKED / SWITCHED RACK PDU // EXACT SKU ]
CyberPower PDU41021 Switched PDU
120 V single-phase, 15 A input; 16 NEMA 5-15R outlets, with individual switching and network management. This static record covers the named model only; confirm complete regional suffix, revision and nameplate before installation.
ARCHIVAL IDENTIFICATION: PDU41021. Record the complete label, serial/date code, firmware and condition; similarly named models are not electrically interchangeable.
Exact model specifications
| SKU / topology | PDU41021 — networked switched rack power distribution unit; no UPS battery or stored runtime. |
|---|---|
| Input and output voltage | 100–120 V AC input; 100–120 V AC output |
| Phase / ampacity | Single phase; 15 A input, 12 A maximum continuous load (80% derating) |
| Outlet count and type | 16 × NEMA 5-15R (eight front, eight rear); all outlet banks are switched |
| Metering / outlet switching | Input-level V/A/W load monitoring on local LCD and via network; individual outlet on/off/cycle control. |
| Network management | RJ45 Ethernet management with web interface and SNMP; optional alerts and remote power sequencing depend on installed firmware/configuration. |
| Rack dimensions | 1U horizontal, 19-inch equipment-rack mounting; published chassis approx. 17 × 8.5 × 1.7 in (W×D×H). |
| Plug and load compatibility | Attached NEMA 5-15P; connect only to a grounded 120 V NEMA 5-15R branch-circuit receptacle with matching rating. Output accepts NEMA 5-15 plugs. |
| Electrical safety | Use on a properly grounded, dedicated/adequately rated branch circuit; total continuous load must not exceed 12 A. Do not exceed receptacle or cord ratings. Confirm the nameplate and certification marks; unplug before cleaning or service. |
Service and safe deployment
- Verify voltage, phase, inlet plug, circuit ampacity, continuous load and per-outlet ratings against the PDU nameplate and the exact product manual.
- Use grounded, correctly protected service; never defeat the protective-earth conductor, overload an outlet/bank, or daisy-chain power strips/PDUs.
- Mount the chassis using the manufacturer-approved brackets and preserve ventilation and strain relief. Inspect cord, plugs, receptacles and enclosure for heat, wear or damage.
- Disconnect upstream power before installation, relocation or service. Do not open energized mains equipment; use a qualified electrician where required.
- Network management can switch power to connected systems; isolate management access, set unique credentials and verify firmware before deployment.
Manufacturer sources and manual
- Manufacturer product page — CyberPower PDU41021 Switched PDUManufacturer model listing and configuration details; match the complete SKU and region.
- Manufacturer documentation — PDU41021 User ManualManufacturer manual, technical data or specifications; use the revision applicable to the unit label and follow its installation and safety directions.