[ ONLINE DOUBLE-CONVERSION UPS // IDENTIFIED MODEL ]
Smart App Online OL1500RTXL2U
CyberPower OL1500RTXL2U: 1500 VA / 1350 W online double-conversion UPS. This record covers only the identified SKU and regional configuration; match complete model code and nameplate to manufacturer documentation.
ARCHIVAL IDENTIFICATION: Record full SKU, region, serial/date code, firmware/revision, installed options, battery identifier and observed condition. Similar product names do not prove electrical compatibility.
Model specifications
| Exact model / topology | CyberPower OL1500RTXL2U; Online double-conversion (pure sine-wave output). |
|---|---|
| Rated output | 1500 VA / 1350 W. VA and W limits are separate constraints; never exceed either. |
| Input / output voltage | Input: 120 V nominal, North American model. Output: Selectable 100 / 110 / 115 / 120 / 125 V AC per manufacturer settings. |
| Input connection | NEMA 5-15P input plug. |
| Output receptacles | 8 × NEMA 5-15R output receptacles. |
| Battery chemistry / service | Internal sealed lead-acid (VRLA) battery pack, user-replaceable as directed by the model manual; exact approved battery part and procedure must match the nameplate/revision. |
| Runtime | Use the OL1500RTXL2U manufacturer load/runtime chart in the product documentation. Runtime depends on actual watts, battery condition and age, charge state, environment and any compatible external battery module. |
| Transfer behavior | Online inverter continuously supplies the load in normal mode, avoiding a mains-to-inverter transfer interval. Internal bypass and battery/fault transitions remain subject to the model manual and operating limits. |
| Communications / compatibility | USB and serial communications; optional network management via supported card, with PowerPanel software support. Confirm host operating-system and card firmware compatibility. |
| Compatibility / safety | 120 V input and configurable 100–125 V output. Verify 5-15P branch-circuit connection and 5-15R plugs, nameplate output limit and load inrush. Not a substitute for correct grounding or branch-circuit protection. Read the exact revision of the manufacturer manual before connection, service or battery replacement. |
Service and compatibility notes
- Measure and record connected watts and source voltage; runtime is not guaranteed for an aged or untested battery.
- Do not open energized mains equipment. Never defeat protective earth, overload an outlet, use damaged equipment, or substitute an unapproved battery.
- For hardwired or high-current versions, qualified installation, rated branch protection and local electrical code apply.
- Confirm the complete model suffix, input wiring, output voltage, outlet map and manual revision against the unit nameplate before connecting equipment.
Manufacturer datasheet and manual sources
- CyberPower OL1500RTXL2U manufacturer product specificationsOfficial model specification and downloads page.
- CyberPower OL1500RTXL2U user manualModel-specific safety, operating, battery and runtime documentation.