[ LINE-INTERACTIVE UPS // MODEL RECORD ]
APC Smart-UPS SMT750I
230 V line-interactive Smart-UPS, 750 VA / 500 W, six IEC C13 outputs. The specifications below are for this named model and region only; verify the complete product label and matching manual before deployment or service.
ARCHIVAL IDENTIFICATION: Preserve the complete SKU, suffix, region, date code, revision, installed battery part (if present), firmware and physical condition. Similar model names do not establish hardware equivalence.
Specifications, conditions & service
| Catalog subcategory | Line-interactive UPS |
|---|---|
| Topology / power path | Line-interactive UPS with AVR (boost/trim); the inverter supplies load during an outage. |
| Ratings / output configuration | 750 VA / 500 W; 230 V model. Six IEC C13 outputs; verify exact outlet group markings and input connector on the regional unit. |
| Battery / replaceability | Sealed lead-acid cartridge; APC lists a replaceable battery for the SMT750I. Confirm model-compatible RBC number and follow manual replacement instructions. |
| Runtime / limits and conditions | APC runtime curves/calculator are load-specific; use the SMT750I model and connected watt load. Runtime depends on battery age, condition, temperature and charge; there is no guaranteed universal minutes figure. |
| Interfaces / monitoring | LCD; USB and serial communications; SmartSlot for compatible optional management cards. Compatibility of a card and PowerChute version is model/OS-specific. |
| Safety / installation caveats | 230 V regional model; do not connect to 120 V supply. 500 W maximum. Observe the manual’s earth/ground, battery and load cautions; SmartSlot/network options may be sold separately. |
| Model variants / revision checks | SMT750I (230 V IEC) differs from SMT750 (120 V NEMA) and SMT750IC; match label, outlet arrangement and manual suffix. |
Field service / archive notes
- Record labels and connector layout before installation; document load, input conditions, measured behavior and test date separately from manufacturer-rated values.
- Never open energized mains equipment. Battery devices can retain dangerous voltage or high fault current; follow the manufacturer’s replacement and recycling procedure.
- Inspect enclosure, cord, plugs, grounding, indicators, alarms and battery condition. Quarantine damaged, swollen, leaking or heat-affected equipment.
- Network-management appliances should be isolated, updated where supported and configured with non-default credentials; do not expose legacy management interfaces directly to the public internet.
Manufacturer references
- Manufacturer product listing — APC Smart-UPS SMT750IModel identity and product-family specification reference. Confirm exact regional SKU against the chassis label.
- Manufacturer manual / support documentationConsult the version matching the exact SKU. Runtime references are load- and condition-dependent estimates where supplied, never a guarantee for a particular aged unit.