[ DVD-ROM READERS // IDENTIFIED MODEL ]
Toshiba SD-M1502
Read-only DVD-ROM/video and CD media support. Rated maximums and host setup below are specific to Toshiba SD-M1502; verify the complete OEM suffix and firmware on the label.
IDENTIFICATION: Compare the full model, suffix, OEM part number and firmware to the cited documentation before fitting, servicing, or attempting preservation reads.
Documented specifications
| Catalog subcategory | DVD-ROM readers (read-only model class) |
|---|---|
| Exact model | Toshiba SD-M1502 |
| DVD read formats | DVD-ROM, DVD-Video |
| DVD read speed | up to 12×; vendor maximum, not a sustained guarantee |
| CD read formats | CD-ROM, CD-DA (audio CD) |
| CD read speed | up to 40×; vendor maximum, media and mode dependent |
| Interface | Internal IDE / ATAPI (PATA) |
| Bay and mechanism | 5.25-inch half-height tray-load bay; measure chassis depth, faceplate and mounting points before installation. |
| Host compatibility | Requires an ATAPI-capable parallel-ATA host; DVD-Video playback needs compatible decoder software and supported region configuration. |
| Firmware, region and jumper caveats | Select IDE Master/Slave/Cable Select using the rear jumper chart and host topology. The RPC/region state is firmware-governed; check the exact drive suffix, firmware and region changes remaining before use. |
Host fit & preservation notes
- Requires an ATAPI-capable parallel-ATA host; DVD-Video playback needs compatible decoder software and supported region configuration.
- Select IDE Master/Slave/Cable Select using the rear jumper chart and host topology. The RPC/region state is firmware-governed; check the exact drive suffix, firmware and region changes remaining before use.
- Read ratings do not imply write capability. Treat writable/rewritable media as supported only when this exact model manual explicitly lists it.
- For imaging, record the complete drive label, OEM suffix, firmware, host controller, software, disc type and read errors; retain checksummed images and logs.
- Handle discs by the edge or center hole; use a clean case in cool, dry storage away from direct sunlight. Avoid adhesive labels, abrasives and undocumented polishing/solvents.
Optical media access is sensitive to disc condition, firmware and host software. A published peak “×” rating is a format-specific maximum, not guaranteed throughput.
Model documentation
- Toshiba SD-M1502 user manual (ManualsLib)Model-specific documentation listing for the SD-M1502; follow the manual corresponding to the unit revision.
- Toshiba SD-M1502 user manual scan (Internet Archive)Archived user-manual scan identified for the SD-M1502; use the exact model label and revision when interpreting the setup pages.