ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ INDIVIDUAL COMPONENT // OPTICAL DRIVES ]

AOpen CD-940E

Read-only internal CD-ROM reader. Specifications below identify the exact model; nearby family variants may use a different interface, mechanism, firmware, or jumper layout.

Original local schematic labeled AOpen CD-940E; conceptual only, not a product photograph or dimensional drawing
ORIGINAL LOCAL SVG SCHEMATIC // NOT A PHOTOGRAPH OR DIMENSIONAL DRAWING

IDENTIFICATION: AOpen CD-940E · verify the full label, suffix and revision against the cited manual before assigning interface, disc-format, firmware or installation characteristics.

Verified specifications

Catalog subcategoryCD-ROM readers
Exact product identifierAOpen CD-940E
Read speed40× maximum CD-ROM read; maximum rating is not a guarantee for a particular disc or transfer path.
Supported CD formatsCD-ROM Mode 1/2, CD-DA, CD-ROM XA, CD-I and Photo CD; read-only, not a CD-R/RW writer.
Host interfaceEnhanced IDE / ATAPI (PATA), 40-pin
Host and mechanical compatibilityInternal half-height 5.25-inch motorized tray-loading unit. Requires an IDE/ATAPI host, suitable legacy BIOS/OS support and 5 V/12 V power; not slimline or native SATA.
Firmware / jumper caveatSelect MA/SL/CS only from the CD-940E manual and the chassis label; the manual’s default may differ by production run. Do not use a generic jumper pin order. Confirm CD-940E versus CD-940E/AKU suffix and board revision before firmware service; do not flash a nearby AOpen CD-40X family image unless it explicitly lists this unit.

Installation and preservation notes

  • Before connection, compare the unit label, interface connector and jumper markings with the model-specific manual. Do not power an uncertain pinout.
  • For this PATA/ATAPI unit, assign one master and one slave per IDE channel, or follow Cable Select requirements on a compatible cable.
  • Keep the original firmware identity, host adapter/BIOS, driver version, disc type, read-error log and verified image checksum together during preservation work.
  • Use this record for read compatibility only: a CD-ROM reader is not evidence of disc-writing support.

Manufacturer, archive and manual sources

  1. AOpen — CD-940E download/manual archiveModel-specific manual archive and product download record.
  2. AOpen CD40X/CD-940E User Manual — ManualMachineArchived AOpen CD-940E family manual with IDE setup.

Sources are model manuals, manufacturer archives or technical archives. A related-family manual is identified as such; verify the exact drive label/revision before applying its jumper or firmware instructions.