[ IDENTIFIED PRODUCT // PCIE 4.0 NVME ]
WD_BLACK SN770M 2 TB
2 TB M.2 2230 SSD identified by the complete manufacturer part number below. Capacity, heatsink, interface mode and regional suffix can change specifications; do not transfer ratings from a neighboring SKU.
SKU IDENTIFICATION: WD_BLACK SN770M, 2 TB, part number WDS200T3X0G. Verify the complete label, hardware revision and firmware before installation.
Manufacturer-identified specifications
| Product / exact MPN | WD_BLACK SN770M 2 TB (WDS200T3X0G) |
|---|---|
| Capacity / form factor | 2 TB; M.2 2230. |
| Interface / host lanes | PCIe 4.0 x4 NVMe. Published maxima require the compatible host generation and lane configuration; an older or lane-shared host can negotiate lower throughput. |
| Controller | Not specified in the WD product references cited. |
| NAND | The cited WD product references do not identify NAND type or supplier. |
| Sequential performance | Up to 5,150 MB/s sequential read and 4,850 MB/s sequential write. Vendor-rated figures apply under manufacturer test conditions, not as guaranteed sustained real-world results. |
| Endurance / warranty | 1,200 TBW; five-year limited warranty (manufacturer specifications). |
| Thermal package | The cited WD references do not state an operating-temperature range. This compact 2230 module still needs the host’s approved thermal path; keep the handheld/laptop enclosure airflow unobstructed. |
Firmware, host compatibility & thermal cautions
- Check the WD product support/downloads page for model-matched firmware and diagnostics. Use the exact WDS200T3X0G model, not the 2280 SN770.
- Designed for M.2 2230 NVMe slots. Confirm physical 30 mm standoff/retention, enclosure clearance, PCIe lane support and BIOS/UEFI boot compatibility; it will not fit a 2280-only retention layout without an approved adapter.
- Check M.2 keying, slot length, single-/double-sided clearance, lane sharing, and system BIOS/UEFI support in the exact host manual; M.2 shape alone does not prove NVMe or boot compatibility.
- Follow the drive and host maker’s heatsink and thermal-pad instructions. Keep airflow around the controller area, do not stack thermal materials or remove factory labels/cooling without explicit guidance, and expect sustained performance to vary with temperature and workload.
- Shut down and remove standby power as instructed before installation; use ESD precautions. Back up data and retain recovery media and encryption keys before changing storage or updating firmware.
Manufacturer product, specification & service references
- WD_BLACK SN770M — manufacturer product specificationsManufacturer source for product identity and the product-specific specifications referenced above.
- Western Digital — model-specific product downloads and supportSecond manufacturer source for technical documentation, product support or model features.
Ratings are included only where published by the manufacturer in the linked product references; undisclosed controller/NAND details and capacity-specific values are not inferred. Firmware availability and revisions can change; verify against the physical model and host before service.