[ PCIE 3.0 X4 NVME // IDENTIFIED PRODUCT ]
WD_BLACK SN750 NVMe SSD 2 TB
2 TB M.2 2280, bare module; PCIe 3.0 x4; NVMe NVMe SSD. Exact manufacturer SKU WDS200T3X0C. Capacity-specific manufacturer ratings and model compatibility notes follow. Peak performance is not a guaranteed sustained result.
IDENTIFICATION: WD_BLACK SN750 NVMe SSD — 2 TB, complete SKU WDS200T3X0C. Verify label, suffix, hardware revision and firmware; similarly named OEM, regional, heatsink and capacity variants may differ.
Manufacturer-identified specifications
| Product / exact SKU | WD_BLACK SN750 NVMe SSD 2 TB — WDS200T3X0C |
|---|---|
| Capacity / form factor | 2 TB; M.2 2280, bare module. |
| Interface / host lanes | PCIe 3.0 x4; NVMe. Link speed negotiates to the host slot, CPU/chipset lane allocation and platform firmware; verify the system manual. |
| Protocol | NVMe; product revision where identified in manufacturer documentation. Confirm firmware/feature support for OEM and region-specific variants. |
| Sequential performance / endurance | Up to 3,470 MB/s read and 3,000 MB/s write; endurance 1,200 TBW. Manufacturer-rated maxima under stated conditions, not independent test results or guaranteed sustained speeds. |
| Controller | Exact controller not specified in the cited public WD/SanDisk product materials. |
| NAND / media | NAND generation/die is not specified in the cited public WD/SanDisk product materials. |
| Thermal / service detail | WDS200T3X0C is the bare-module SKU; the heatsink version has a different suffix. Keep airflow over the module or use the motherboard M.2 heatsink if compatible, with proper pad contact and clearance. Sustained workloads can behave differently as temperature and cache conditions change. |
Host, firmware & installation compatibility
- M.2 2280 M-key NVMe drive, PCIe 3.0 x4. Confirm NVMe (not SATA-only) signaling, PCIe lane allocation and UEFI boot support in the host manual. WD/SanDisk support and firmware tools may not recognize OEM or region-specific variants; match the physical SKU and firmware instructions before applying updates.
- Confirm the motherboard/laptop manual for M-key NVMe signaling, 2280 length, single/double-sided clearance, PCIe lane sharing and BIOS/UEFI boot support. An M.2 socket may be SATA-only.
- Check OS NVMe driver support and backup/recovery options before migrating a boot drive. Back up data before drive firmware updates; use only the manufacturer utility and firmware version matched to the full SKU/revision.
- Provide the airflow and heatsink clearance noted above. Do not stack thermal covers or remove factory labels/heatsinks unless the vendor service instructions permit it; avoid hot-plugging an M.2 module.
Model-specific manufacturer references
- WD_BLACK SN750 — official SanDisk product supportManufacturer source for product-family or support documentation. Confirm the complete SKU, capacity table, hardware/firmware revision and current compatibility for the physical drive.
- WD internal SSD endurance and warranty periods — manufacturer supportManufacturer source for product-family or support documentation. Confirm the complete SKU, capacity table, hardware/firmware revision and current compatibility for the physical drive.
- NVM Express — specificationsProtocol reference only; not a drive-specific specification or compatibility guarantee.
Maximum sequential rates, endurance and thermal behavior depend on workload, firmware, cache state and host cooling. Check current manufacturer documents for exact revision and warranty terms before deployment.