[ IDENTIFIED PRODUCT // PCIE 4.0 NVME ]
TEAMGROUP MP44 4 TB
4 TB M.2 2280, single-sided SSD identified by the complete manufacturer part number below. Capacity, heatsink, interface mode and regional suffix can change specifications; do not transfer ratings from a neighboring SKU.
SKU IDENTIFICATION: TEAMGROUP MP44, 4 TB, part number TM8FPW004T0C101. Verify the complete label, hardware revision and firmware before installation.
Manufacturer-identified specifications
| Product / exact MPN | TEAMGROUP MP44 4 TB (TM8FPW004T0C101) |
|---|---|
| Capacity / form factor | 4 TB; M.2 2280, single-sided. |
| Interface / host lanes | PCIe 4.0 x4; NVMe. Published maxima require the compatible host generation and lane configuration; an older or lane-shared host can negotiate lower throughput. |
| Controller | Not specified in the cited TEAMGROUP product references; no controller variant is assumed. |
| NAND | TEAMGROUP identifies 3D NAND; NAND type and vendor are not specified in the cited references. |
| Sequential performance | Up to 7,000 MB/s sequential read and 6,000 MB/s sequential write (TEAMGROUP product specification). Vendor-rated figures apply under manufacturer test conditions, not as guaranteed sustained real-world results. |
| Endurance / warranty | 2,000 TBW (TEAMGROUP product specification). |
| Thermal package | The MP44 uses a thin graphene heat-dissipating label; TEAMGROUP describes it as compatible with a motherboard M.2 heatsink. Do not remove it or stack thermal pads unless the host/product instructions permit. An operating-temperature limit is not stated in the cited page. |
Firmware, host compatibility & thermal cautions
- Use TEAMGROUP’s official support/SSD utility channels to check for any update applicable to the exact MP44 revision and SKU; hardware versions can vary.
- Requires an M.2 2280 PCIe/NVMe socket. Check the host manual for Gen4 lanes, boot support, heatsink/pad contact and clearance; the graphene label is not a guarantee that a hot or enclosed host needs no cooling.
- Check M.2 keying, slot length, single-/double-sided clearance, lane sharing, and system BIOS/UEFI support in the exact host manual; M.2 shape alone does not prove NVMe or boot compatibility.
- Follow the drive and host maker’s heatsink and thermal-pad instructions. Keep airflow around the controller area, do not stack thermal materials or remove factory labels/cooling without explicit guidance, and expect sustained performance to vary with temperature and workload.
- Shut down and remove standby power as instructed before installation; use ESD precautions. Back up data and retain recovery media and encryption keys before changing storage or updating firmware.
Manufacturer product, specification & service references
- TEAMGROUP MP44 4 TB — product specificationsManufacturer source for product identity and the product-specific specifications referenced above.
- TEAMGROUP — manufacturer SSD warranty termsSecond manufacturer source for technical documentation, product support or model features.
Ratings are included only where published by the manufacturer in the linked product references; undisclosed controller/NAND details and capacity-specific values are not inferred. Firmware availability and revisions can change; verify against the physical model and host before service.