[ PCIE 5.0 NVME DRIVES // IDENTIFIED PRODUCT ]
Samsung 9100 PRO 2 TB (MZ-VAP2T0BW)
2 TB M.2 2280, bare module; PCIe 5.0 NVMe SSD. Cataloged by the complete manufacturer part number below; performance figures are vendor-rated, not independent test results.
IDENTIFICATION: Verify the complete MPN, suffix, serial/date code, hardware revision and firmware against the product label. Capacity variants, factory heatsinks and regional SKUs may differ; the link and rated data below apply only to the specified configuration where the manufacturer identifies it.
Manufacturer-identified specifications
| Product / MPN | Samsung 9100 PRO 2 TB (MZ-VAP2T0BW) — MZ-VAP2T0BW |
|---|---|
| Capacity / form factor | 2 TB; M.2 2280, bare module. |
| Interface / lane width | PCIe 5.0 x4. |
| Protocol | NVMe 2.0. |
| Rated performance / endurance | Sequential up to 14,800 MB/s read and 13,400 MB/s write; 1,200 TBW endurance for the 2 TB SKU. |
| Model era | 2025 product generation; check manufacturer lifecycle/support notice. |
| Heatsink / revision | Bare module SKU; separate factory-heatsink product exists. Gen5 thermal performance depends on board heatsink contact and system airflow. |
Compatibility, installation & service
- Samsung 9100 PRO requires a host with PCIe 5.0 x4 capability to approach rated throughput; on Gen4 or narrower links it negotiates lower. Check exact model suffix and firmware. UEFI NVMe boot, CPU lane availability, and slot generation are platform-specific.
- Use the motherboard manual to identify a true PCIe 5.0 x4 M.2 slot and any CPU/slot sharing. Confirm board M.2 thermal-pad and cover clearance; do not fit the bare MPN under a heatsink that presses unevenly. Track firmware and health, back up before updates, and ensure active system airflow for long writes. Verify bootability with the exact board/BIOS, not just OS data-drive enumeration.
- Do not hot-plug an M.2 module unless the server/platform manual explicitly documents hot-plug support. Shut down cleanly, disconnect standby power when instructed, and use electrostatic-discharge precautions during handling.
- Before replacing a boot drive, verify a recoverable backup, OS recovery media, encryption keys, firmware settings and the target system’s boot mode; physical fit does not establish compatibility.
Manufacturer references
- Samsung 9100 PRO — manufacturer product specificationsOfficial manufacturer product/specification reference; use the exact MPN on the drive label and its linked specification/downloads for revisions, capacity ratings, fit and warranty limits.
- NVM Express — specifications and technical documentationStandards reference for NVMe; it does not establish this product’s SKU-specific implementation.
Manufacturer ratings are model/capacity-specific and measured under stated vendor conditions; they are not guarantees of sustained speed in every host. Confirm current datasheet/manual, support status and warranty in the manufacturer’s regional support portal before deployment.