[ PCIE 4.0 NVME DRIVES // IDENTIFIED PRODUCT ]
Patriot Viper VP4300 2 TB (VP4300-2TBM28H)
2 TB PCIe Gen4 x4 M.2 2280 NVMe client SSD, cataloged by the VP4300-2TBM28H code. The manufacturer lists separate thermal spreader options; package and cooling fit must be verified. Performance values are manufacturer-rated maxima, not independent test results.
IDENTIFICATION: Verify the complete MPN, regional suffix, serial/date code and firmware from the drive label. Capacity variants, hardware revisions and cooling bundles can differ; the specifications below are for Viper VP4300 2 TB where the cited manufacturer documentation identifies them.
Manufacturer-identified specifications
| Product / MPN | Patriot Viper VP4300 2 TB (VP4300-2TBM28H); manufacturer code VP4300-2TBM28H. |
|---|---|
| Capacity / form factor | 2 TB; M.2 2280 (22 × 80 mm), single module. Confirm sidedness and surrounding component clearance from the exact revision. |
| Interface / lane width | PCIe 4.0 x4 NVMe; link speed is host-negotiated and can be lower on older hardware. |
| Protocol / flash | NVMe over PCI Express; manufacturer identifies this product as a client M.2 SSD. Use the exact product document for protocol revision, NAND and any DRAM/HMB details. |
| Rated sequential performance | up to 7,400 MB/s read and 6,800 MB/s write. Ratings depend on capacity, firmware, workload and the test conditions published by the manufacturer. |
| Endurance / warranty | Use Patriot’s current capacity-specific warranty/TBW terms; the VP4300 may ship with different cooling accessories by package. |
| Model generation / thermal package | 2021 product generation. VP4300-2TBM28H; 2 TB, M.2 2280. Check box contents and thermal-spreader choice for the specific retail package. |
Compatibility, installation & service
- The drive needs a PCIe/NVMe M.2 socket, not an M.2 SATA-only connection. Check the motherboard manual for x4 lane availability and decide between the supplied low-profile spreader and a board heatsink; avoid stacking both if it prevents proper pad contact. For laptops, verify module thickness and both-side clearance.
- Read the motherboard or laptop service manual to check socket keying, supported protocol, PCIe generation/lane count, shared SATA/PCIe lanes, BIOS boot support, standoff position, module sidedness and cover clearance. M.2 is a form factor, not proof that a socket supports NVMe.
- Back up data and retain recovery media and encryption keys before replacement or firmware service. Use only the manufacturer utility/firmware intended for the exact model and capacity; confirm power and system stability during updates.
- Follow the host’s service procedure, shut down and disconnect standby power when instructed, and use electrostatic-discharge precautions. Do not hot-plug a client M.2 SSD unless the platform manual explicitly supports it.
- Monitor SMART health and temperature during sustained transfers. High burst benchmarks do not predict sustained writes, thermals, or service life; keep independent backups regardless of the TBW rating.
Sources & further reading
- Patriot Viper VP4300 PCIe Gen4 x4 SSD — manufacturer product pagePatriot identifies the VP4300 model family and its maximum sequential performance; use the full SKU for the capacity-specific service terms.
- NVM Express — specifications and technical documentationTechnical reference for the listed model or the NVMe storage interface; confirm current revision and regional SKU notes with the manufacturer before service.
Rated figures are not guarantees of sustained throughput in every host. Check the current manufacturer datasheet, installation guidance and warranty terms before deployment.