[ IDENTIFIED PRODUCT // PCIE 4.0 NVME ]
GIGABYTE AORUS Gen4 7300 SSD 1 TB
1 TB M.2 2280 SSD identified by the complete manufacturer part number below. Capacity, heatsink, interface mode and regional suffix can change specifications; do not transfer ratings from a neighboring SKU.
SKU IDENTIFICATION: GIGABYTE AORUS Gen4 7300 SSD, 1 TB, part number GP-AG70S1TB. Verify the complete label, hardware revision and firmware before installation.
Manufacturer-identified specifications
| Product / exact MPN | GIGABYTE AORUS Gen4 7300 SSD 1 TB (GP-AG70S1TB) |
|---|---|
| Capacity / form factor | 1 TB; M.2 2280. |
| Interface / host lanes | PCIe 4.0 x4; NVMe. Published maxima require the compatible host generation and lane configuration; an older or lane-shared host can negotiate lower throughput. |
| Controller | Not specified on the cited GIGABYTE pages. |
| NAND | Not specified on the cited GIGABYTE pages. |
| Sequential performance | Up to 7,300 MB/s sequential read and 6,000 MB/s sequential write. Vendor-rated figures apply under manufacturer test conditions, not as guaranteed sustained real-world results. |
| Endurance / warranty | 700 TBW; five-year limited warranty (GIGABYTE specification). |
| Thermal package | Bare M.2 module with a manufacturer-supplied thermal solution. Follow GIGABYTE and motherboard heatsink installation guidance; avoid obstructing airflow. The cited product pages do not state an operating-temperature range. |
Firmware, host compatibility & thermal cautions
- Check GIGABYTE Support for downloads and storage utility updates for the GP-AG70S1TB; confirm the full model before updating.
- Use a PCIe 4.0 x4 NVMe-capable M.2 2280 socket for the published maximums. Check motherboard BIOS/UEFI support, lane allocation, heatsink clearance and the board manual’s thermal-pad instructions.
- Check M.2 keying, slot length, single-/double-sided clearance, lane sharing, and system BIOS/UEFI support in the exact host manual; M.2 shape alone does not prove NVMe or boot compatibility.
- Follow the drive and host maker’s heatsink and thermal-pad instructions. Keep airflow around the controller area, do not stack thermal materials or remove factory labels/cooling without explicit guidance, and expect sustained performance to vary with temperature and workload.
- Shut down and remove standby power as instructed before installation; use ESD precautions. Back up data and retain recovery media and encryption keys before changing storage or updating firmware.
Manufacturer product, specification & service references
- GIGABYTE AORUS Gen4 7300 1 TB — specificationsManufacturer source for product identity and the product-specific specifications referenced above.
- GIGABYTE AORUS Gen4 7300 1 TB — product featuresSecond manufacturer source for technical documentation, product support or model features.
Ratings are included only where published by the manufacturer in the linked product references; undisclosed controller/NAND details and capacity-specific values are not inferred. Firmware availability and revisions can change; verify against the physical model and host before service.