[ PCIE 4.0 NVME // IDENTIFIED PRODUCT ]
Crucial P5 Plus 2 TB (CT2000P5PSSD8)
Product-specific catalog record for the manufacturer code below. Performance figures are manufacturer-rated values, not independent test results.
IDENTIFY THE EXACT SKU: Compare the full MPN, label suffix, form factor, firmware and any OEM/security code before applying these notes. Family variations, capacity changes and factory thermal assemblies can materially change ratings and compatibility.
Manufacturer-identified specifications
| Product / MPN | Crucial P5 Plus 2 TB (CT2000P5PSSD8) — CT2000P5PSSD8 |
|---|---|
| Capacity / form factor | 2 TB; M.2 2280, bare module. |
| Interface / lane width | PCIe 4.0 x4. |
| Protocol | NVMe 1.4. |
| Rated performance / endurance | Up to 6,600 MB/s sequential read and 5,000 MB/s sequential write; 1,200 TBW for the 2 TB SKU. |
| Heatsink / revision caveat | Bare module, no factory heatsink on this MPN; use only a board thermal solution with correct pad placement and clearance. The P5 Plus is distinct from the P3 Plus and existing T500. Performance figures refer specifically to CT2000P5PSSD8; thermal and sustained performance depend on host cooling and workload. |
Compatibility, installation & service
- Confirm Gen4 x4 M.2 2280 socket and UEFI NVMe boot compatibility from the motherboard manual. Check CPU lane allocation, shared ports and board-heatsink compatibility. Keep the drive label intact, apply the board pad as directed, record firmware/health and back up before service or firmware update.
- The P5 Plus is distinct from the P3 Plus and existing T500. Performance figures refer specifically to CT2000P5PSSD8; thermal and sustained performance depend on host cooling and workload.
- Confirm host boot mode, OS NVMe support, CPU lane generation, socket length/keying, power and controller/backplane qualification from the system manual; physical fit alone does not establish compatibility.
- Before drive replacement, check backup integrity, encryption keys, firmware settings, recovery media and array rebuild plans. Use electrostatic-discharge precautions and never hot-remove unless the host documentation explicitly supports it.
Manufacturer references
- Crucial P5 Plus CT2000P5PSSD8 — exact manufacturer product pageManufacturer specification/product reference. Verify the precise SKU and its capacity-specific table, manual or linked downloads against the installed drive label.
- NVM Express — specificationsProtocol standards reference; it does not establish product-specific features or host boot support.
- PCI-SIG — PCI Express specificationsInterface generation/lanes standards reference, not a substitute for the host motherboard/server manual.
Manufacturer peak ratings reflect stated test conditions and may not represent sustained writes in a thermally constrained or cache-exhausted host. Confirm current regional support, service status and warranty terms before use.