[ IDENTIFIED PRODUCT // PCIE 4.0 NVME ]
Crucial P310 1 TB
1 TB M.2 2280 SSD identified by the complete manufacturer part number below. Capacity, heatsink, interface mode and regional suffix can change specifications; do not transfer ratings from a neighboring SKU.
SKU IDENTIFICATION: Crucial P310, 1 TB, part number CT1000P310SSD8. Verify the complete label, hardware revision and firmware before installation.
Manufacturer-identified specifications
| Product / exact MPN | Crucial P310 1 TB (CT1000P310SSD8) |
|---|---|
| Capacity / form factor | 1 TB; M.2 2280. |
| Interface / host lanes | PCIe 4.0 x4 NVMe. Published maxima require the compatible host generation and lane configuration; an older or lane-shared host can negotiate lower throughput. |
| Controller | Not specified in the Crucial product and support references cited. |
| NAND | Micron 3D NAND; cell type is not identified in the cited Crucial references. |
| Sequential performance | Up to 7,100 MB/s sequential read. The cited Crucial product page does not provide a capacity-specific sequential-write figure; none is inferred here. Vendor-rated figures apply under manufacturer test conditions, not as guaranteed sustained real-world results. |
| Endurance / warranty | TBW is not stated in the cited product references. Check the product warranty terms for the exact SKU. |
| Thermal package | The cited product references do not state an operating-temperature range. Use the host’s M.2 thermal solution as directed and monitor temperatures under sustained load. |
Firmware, host compatibility & thermal cautions
- Crucial Storage Executive and the P310 support page are Crucial’s routes for checking drive health, firmware and model-specific support.
- Use a 2280 M.2 socket that supports PCIe/NVMe; verify lane allocation, BIOS/UEFI boot support, double-sided clearance and whether the host supplies a heatsink.
- Check M.2 keying, slot length, single-/double-sided clearance, lane sharing, and system BIOS/UEFI support in the exact host manual; M.2 shape alone does not prove NVMe or boot compatibility.
- Follow the drive and host maker’s heatsink and thermal-pad instructions. Keep airflow around the controller area, do not stack thermal materials or remove factory labels/cooling without explicit guidance, and expect sustained performance to vary with temperature and workload.
- Shut down and remove standby power as instructed before installation; use ESD precautions. Back up data and retain recovery media and encryption keys before changing storage or updating firmware.
Manufacturer product, specification & service references
- Crucial P310 1 TB — exact product pageManufacturer source for product identity and the product-specific specifications referenced above.
- Crucial P310 — manufacturer support and firmwareSecond manufacturer source for technical documentation, product support or model features.
Ratings are included only where published by the manufacturer in the linked product references; undisclosed controller/NAND details and capacity-specific values are not inferred. Firmware availability and revisions can change; verify against the physical model and host before service.