[ PCIE 5.0 X4 NVME // IDENTIFIED PRODUCT ]
CORSAIR MP700 PRO 4 TB
4 TB M.2 2280 with integrated active air cooler; PCIe 5.0 x4 NVMe SSD. Manufacturer SKU CSSD-F4000GBMP700PRO. Published capacity-specific performance and endurance are vendor ratings; no performance beyond the manufacturer conditions is implied.
IDENTIFICATION: Match the full manufacturer part number, including suffix, on the drive label and packaging. Capacity, cooler, region, OEM firmware and revision variants are not interchangeable. Published peak rates describe controlled vendor testing, not guaranteed sustained results.
Manufacturer-identified specifications
| Exact product / MPN | CORSAIR MP700 PRO 4 TB — CSSD-F4000GBMP700PRO |
|---|---|
| Capacity / form factor | 4 TB; M.2 2280 with integrated active air cooler. |
| Interface / host lanes | PCI Express 5.0 x4 over an M.2 M-key NVMe socket. Link speed and lane count negotiate to the slot, CPU/chipset routing and host firmware; confirm the motherboard or system manual. |
| Protocol | NVMe over PCIe; verify host support and bootability with the system vendor. An M.2 socket may be SATA-only or may share lanes with other devices. |
| Sequential performance / endurance | Up to 12,400 MB/s sequential read and 11,800 MB/s sequential write. The public CORSAIR listing cited here does not state capacity-specific TBW. Vendor-rated maximums; application load, firmware, temperature, fill level and host configuration affect results. |
| Controller | Controller part number is not identified in the public CORSAIR SKU specification; no controller is inferred. |
| NAND | 3D TLC NAND, per CORSAIR product material. |
| Thermal / power note | This exact 4 TB SKU includes CORSAIR’s active air cooler; reserve vertical and neighboring-card clearance, confirm fan airflow, and do not obstruct the intake or remove the cooler outside approved service. Check the M.2 slot power and firmware/BIOS support; no exact host-system power budget is inferred. |
Host, firmware & installation compatibility
- Verify the motherboard/system manual for an M-key NVMe socket, M.2 2280 mechanical fit, PCIe Gen5 x4 capability, lane sharing and supported-device limitations. The drive can negotiate to a supported earlier PCIe generation, but cannot exceed the host slot’s generation or lane allocation.
- Check current BIOS/UEFI and operating-system NVMe support before installation. Boot support requires platform firmware support and is separate from physical fit or data-drive detection. Vendor SSD-management and firmware tools may support only retail SKUs, not OEM variants.
- Observe the platform’s M.2 heatsink, pad, airflow and clearance instructions. Do not stack covers or remove an integrated thermal assembly unless the manufacturer permits it. Avoid hot-plugging; shut down, isolate standby power as directed and use ESD precautions.
- Back up data and confirm recovery media, encryption keys and firmware/boot settings before replacing a boot drive. Check warranty and service terms for the exact MPN and region.
Manufacturer references & protocol source
- CORSAIR MP700 PRO — product and specification referenceManufacturer product-family or exact-SKU page. Verify this drive’s printed MPN and capacity variant against current source material.
- CORSAIR warranty and support termsManufacturer service reference; coverage and support eligibility depend on exact SKU, region, purchase evidence and applicable terms.
- NVM Express — specificationsProtocol standards reference only; not evidence for this drive’s SKU-specific ratings.
Sequential rates and endurance are manufacturer claims for the identified capacity. Check the linked manufacturer material for current warranty conditions, firmware, compatibility and service instructions.