ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ EXACT MODEL / SKU ]

Ubiquiti UniFi Switch Pro 24 PoE (USW-Pro-24-PoE)

Exact physical interfaces and their nominal link rates are documented below. Link rates are not measured application throughput.

Original local schematic port map for Ubiquiti UniFi Switch Pro 24 PoE (USW-Pro-24-PoE), not a product photograph
UNIQUE LOCAL SVG // PORT MAP NOT TO SCALE

IDENTIFICATION: Confirm model/SKU, hardware revision, power supply and firmware on the physical unit. No measured throughput is asserted.

Model-specific specifications and compatibility

Exact model / SKUUniFi Switch Pro 24 PoE (USW-Pro-24-PoE); manufacturer SKU USW-Pro-24-PoE.
Hardware revisionExact Ubiquiti model USW-Pro-24-PoE; revision is label-specific and not encoded in model string. Verify chassis revision and firmware.
Port count and rates24 x 10/100/1000BASE-T RJ-45 switch ports. Rates are per interface; aggregate full-duplex capacity is not a single-port throughput figure.
PoE standard and budgetPorts 1-16 IEEE 802.3at PoE+ (up to 30 W/port); ports 17-24 IEEE 802.3bt PoE++ (up to 60 W/port); 400 W aggregate budget.
UplinksTwo 10GbE SFP+ uplinks.
Management and VLANManaged through UniFi Network; 802.1Q VLANs, LACP, STP, ACL/QoS and port profiles depend on UniFi software version.
Power inputInternal AC input 100-240 V, 50/60 Hz; 400 W aggregate PoE budget, not a per-port allocation.
Power and compatibility1U rack mount; use a supported UniFi Network version and match IEEE PoE class; qualify SFP+ optics/DACs.
Measured performanceNo independently measured packet-forwarding rate or latency is claimed. Test with documented firmware, packet sizes, port pairs, VLAN/QoS configuration and traffic direction if required.

Installation and identification notes

  • Record SKU, revision, PSU label, serial, firmware and port mapping before commissioning; similar model suffixes may use different power and firmware.
  • Match copper cable category/length and SFP rate, wavelength, fiber type and reach to both ends of every link.
  • For PoE models, confirm endpoint IEEE class negotiation and calculate demand against both per-port limits and aggregate budget.
  • Preserve configuration backups and vendor documentation without publishing credentials or private network data.

Manufacturer datasheets and manuals

  1. Ubiquiti official USW-Pro-24-PoE technical specificationsOfficial Ubiquiti model/series support or specification source; confirm revision against the unit label.
  2. Ubiquiti official USW-Pro-24-PoE datasheetOfficial Ubiquiti model/series support or specification source; confirm revision against the unit label.
  3. Ubiquiti official quick-start guideOfficial Ubiquiti model/series support or specification source; confirm revision against the unit label.

Use the exact label revision to choose current firmware, installation manuals and platform compatibility notes.