ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ EXACT MODEL / SKU ]

TP-Link Omada TL-SG3452XP V1 48-Port Gigabit PoE+ L2+ Managed Switch

Exact physical interfaces and their nominal link rates are documented below. Link rates are not measured application throughput.

Original local schematic port map for TP-Link Omada TL-SG3452XP V1 48-Port Gigabit PoE+ L2+ Managed Switch, not a product photograph
UNIQUE LOCAL SVG // PORT MAP NOT TO SCALE

IDENTIFICATION: Confirm model/SKU, hardware revision, power supply and firmware on the physical unit. No measured throughput is asserted.

Model-specific specifications and compatibility

Exact model / SKUOmada TL-SG3452XP V1 48-Port Gigabit PoE+ L2+ Managed Switch; manufacturer SKU TL-SG3452XP (hardware V1).
Hardware revisionHardware V1.0 as printed on label; firmware and features can differ on later revisions and regional variants.
Port count and rates48 x 10/100/1000BASE-T RJ-45 PoE access ports. Rates are per interface; aggregate full-duplex capacity is not a single-port throughput figure.
PoE standard and budgetIEEE 802.3af/at PoE/PoE+; 500 W aggregate budget shared among ports, subject to endpoint class and thermal limits.
UplinksFour 10GbE SFP+ slots.
Management and VLANOmada SDN controller, standalone web/CLI/SNMP; 802.1Q VLAN, LACP, QoS, ACL and L2+ features are firmware-specific.
Power inputInternal AC input 100-240 V, 50/60 Hz; supplied grounded cord. Size circuit for switch plus endpoint load; 500 W is output budget.
Power and compatibility1U rack mount; verify hardware V1 region and Omada support; sum endpoint demand under 500 W and use qualified SFP+ links.
Measured performanceNo independently measured packet-forwarding rate or latency is claimed. Test with documented firmware, packet sizes, port pairs, VLAN/QoS configuration and traffic direction if required.

Installation and identification notes

  • Record SKU, revision, PSU label, serial, firmware and port mapping before commissioning; similar model suffixes may use different power and firmware.
  • Match copper cable category/length and SFP rate, wavelength, fiber type and reach to both ends of every link.
  • For PoE models, confirm endpoint IEEE class negotiation and calculate demand against both per-port limits and aggregate budget.
  • Preserve configuration backups and vendor documentation without publishing credentials or private network data.

Manufacturer datasheets and manuals

  1. TP-Link official TL-SG3452XP product specificationsOfficial TP-Link model/series support or specification source; confirm revision against the unit label.
  2. TP-Link Omada official datasheet documentsOfficial TP-Link model/series support or specification source; confirm revision against the unit label.
  3. TP-Link Omada official hardware installation guide documentsOfficial TP-Link model/series support or specification source; confirm revision against the unit label.

Use the exact label revision to choose current firmware, installation manuals and platform compatibility notes.