ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ MODEL-SPECIFIC PC WI-FI HARDWARE ]

TP-Link Archer TX3000E AX3000 Wi-Fi 6 PCIe Adapter

Dual-band 2×2 Wi-Fi 6 desktop PCIe adapter with 160 MHz 5 GHz support and Bluetooth 5.0. This record documents the named model and its labeled revision scope; it is not a claim that similarly named variants share identical drivers or radio limits.

Original local schematic of TP-Link Archer TX3000E AX3000 Wi-Fi 6 PCIe Adapter; not a photograph or dimensional drawing
ORIGINAL MODEL-SPECIFIC SVG // NOT TO SCALE

IDENTIFICATION: Match the full product name, model label and hardware revision with its manufacturer page before choosing a driver. Regional channel and OS support can vary.

Dedicated wireless specifications

Cataloged productTP-Link Archer TX3000E AX3000 Wi-Fi 6 PCIe Adapter
Wi-Fi generation / standardsWi-Fi 6 (IEEE 802.11ax), with 802.11a/b/g/n/ac compatibility.
Radio bands, channels & width2.4 GHz and 5 GHz. Channel widths include 20/40 MHz at 2.4 GHz and up to 160 MHz at 5 GHz; typical U.S. channels are 1–11 and 36–165 respectively, subject to region, DFS, access point and driver.
Spatial streams / nominal link rates2×2 MIMO; up to 574 Mb/s at 2.4 GHz and 2,402 Mb/s at 5 GHz with a compatible 160 MHz Wi-Fi 6 access point (nominal AX3000 aggregate label).
Host interfacePCIe x1 host interface; Bluetooth 5.0 function uses a separate motherboard USB 2.0 header cable.
Antenna arrangementTwo detachable high-performance antennas on the included magnetic antenna base with extension lead.
Operating-system compatibilityWindows 10 64-bit is the manufacturer-listed OS for this hardware family; check the TP-Link download page against the revision label before installation.
BluetoothBluetooth 5.0 requires the supplied cable from the card to an available internal USB header.
Regulatory channel noteDual-band only (2.4/5 GHz). DFS channels may be unavailable or restricted by the access point, region, firmware or driver.

Model-specific installation notes

The advertised 2,402 Mb/s 5 GHz mode depends on 160 MHz support at both ends and a clean channel; the PHY label is not application throughput.

2 external antennas are shown in this model’s source documentation. Install only with the correct host connector and driver package; antenna placement, local regulation and access-point capabilities affect operation.

Manufacturer sources

  1. Archer TX3000E official product specificationsOfficial manufacturer source for product specifications, revision-specific software, or compatibility requirements.
  2. Archer TX3000E manufacturer downloads and revision supportOfficial manufacturer source for product specifications, revision-specific software, or compatibility requirements.

Source pages may describe a hardware family or provide revision-selected downloads. Manufacturer regional restrictions and current OS support take precedence over generic interface fit.