[ MODEL-SPECIFIC NETWORK HARDWARE ]
QNAP QXG-10G1T 10GbE Network Expansion Card
Single-port RJ-45 10GbE PCIe card for NAS, server and PC upgrades. Confirm exact product label and revision before applying specifications.
IDENTIFICATION: Confirm manufacturer PID, hardware revision, device ID or module suffix. Nominal standards/link rates are not measurements of payload performance.
Exact specifications and compatibility
| Dedicated subcategory | Ethernet adapters |
|---|---|
| Exact product/model | QNAP QXG-10G1T 10GbE Network Expansion Card |
| Bus, ports and physical interface | PCIe 3.0 x4; one RJ-45 10GBASE-T port; bundled bracket varies with package. |
| PHY, radio or protocol | Marvell AQtion AQC107 controller; Ethernet rates include 10G/5G/2.5G/1G/100MBASE-T when supported by the peer. |
| Nominal rate (not measured) | One 10Gb/s maximum nominal link; throughput depends on host, storage, cable and peer. |
| Measured throughput | No measured benchmark is claimed for a physical specimen. A valid result must record host/peer, link partner, media/cable, driver/firmware, traffic pattern, test tool and duration. |
| Drivers, OS and firmware | QNAP supplies revision-specific drivers for QTS/QuTS hero and Windows/Linux configurations; confirm exact NAS compatibility list and driver package. |
| Compatibility | PCIe x4 and active chassis airflow required; 10GbE cabling category and length must meet the installation channel specification. |
| Variant warning | QXG-10G1T differs from QXG-10G2T and QXG-10G1T-111C 5GbE card. Match product label and confirm bundled bracket/driver support. |
Model and revision notes
QXG-10G1T differs from QXG-10G2T and QXG-10G1T-111C 5GbE card. Match product label and confirm bundled bracket/driver support.
QNAP supplies revision-specific drivers for QTS/QuTS hero and Windows/Linux configurations; confirm exact NAS compatibility list and driver package.
PCIe x4 and active chassis airflow required; 10GbE cabling category and length must meet the installation channel specification.
Archival, ESD and preservation notes
Record card model, serial/MAC, controller and driver. ESD-bag when removed; preserve all brackets and protect heatsink fins.
Document source URL, access date, document revision and specimen label/condition. Preserve without credentials or private configuration.
Primary manufacturer and standards sources
- QNAP QXG-10G1T product pagePrimary manufacturer or standards documentation; verify exact SKU and host revision.
- QNAP network expansion cards and support downloadsPrimary manufacturer or standards documentation; verify exact SKU and host revision.
- IEEE 802.3 Ethernet standardsPrimary manufacturer or standards documentation; verify exact SKU and host revision.
Manufacturer statements cover the named part or its documented product family; the exact labeled revision and vendor compatibility list take precedence.