[ MODEL-SPECIFIC NETWORK HARDWARE ]
Intel Ethernet Network Adapter X710-T2L
Dual-port NBASE-T PCIe adapter using RJ-45 copper connections. This entry uses the labeled manufacturer model identifier and cites primary product/support documentation.
MODEL IDENTIFICATION: Match the complete model/part number and hardware revision on the item label to manufacturer documentation. Do not apply this entry to near-name variants.
Exact specifications and compatibility
| Cataloged model | Intel Ethernet Network Adapter X710-T2L |
|---|---|
| Dedicated subcategory | Ethernet adapters |
| Bus / host interface | PCI Express add-in card. |
| Ports / physical interfaces | 2 × RJ-45; supports 100M/1G/2.5G/5G/10GBASE-T negotiation. |
| PHY, radio or protocol | Intel X710 controller; IEEE 802.3 Ethernet auto-negotiation. |
| PoE | No PoE input or PoE output is documented for this product. |
| Link-rate vs throughput | Up to 10 Gb/s per port; cable, partner and negotiated PHY rate determine actual payload. Link rates are nominal negotiated/PHY specifications, not measured application throughput; no measured specimen result is claimed. |
| Firmware / driver support | Intel Ethernet drivers and adapter NVM; OS-specific support is listed by Intel. |
| Compatibility checks | Use twisted-pair cabling rated for the negotiated distance/rate; check airflow and slot clearance. |
Model-specific notes
Dual-port X710-T2L is distinct from X710-T4L and X710-DA2.
Primary manufacturer sources
- Intel Ethernet Network Adapter X710-T2LManufacturer product specification or documentation for the exact model/family.
- Manufacturer support and compatibility resourcesFirmware, driver, compatibility, revision or support details; applicability may depend on the exact hardware revision and region.
Vendor maximum rates are not test results. Confirm regional variants, hardware revision and current support status with the manufacturer.