ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ MODEL-SPECIFIC NETWORK HARDWARE ]

Intel Ethernet Converged Network Adapter X520-T2

Dual-port 10GBASE-T server adapter from the X520 generation. Confirm exact product label and revision before applying specifications.

Original locally stored interface schematic for Intel Ethernet Converged Network Adapter X520-T2; not to scale
UNIQUE LOCAL SVG // SCHEMATIC ONLY, NOT TO SCALE

IDENTIFICATION: Confirm manufacturer PID, hardware revision, device ID or module suffix. Nominal standards/link rates are not measurements of payload performance.

Exact specifications and compatibility

Dedicated subcategory10 Gigabit and server adapters
Exact product/modelIntel Ethernet Converged Network Adapter X520-T2
Bus, ports and physical interfacePCIe 2.0 x8; two RJ-45 ports, full-height and low-profile bracket options.
PHY, radio or protocolIntel 82599 controller with dual 10GBASE-T PHYs; link mode/backoff depends on peer and cable.
Nominal rate (not measured)2 x 10Gb/s nominal links; aggregate line rate is not a single-stream or measured result.
Measured throughputNo measured benchmark is claimed for a physical specimen. A valid result must record host/peer, link partner, media/cable, driver/firmware, traffic pattern, test tool and duration.
Drivers, OS and firmwareIntel ixgbe Linux driver; Windows Server/VMware packages are version- and NVM-dependent.
CompatibilityPCIe x8, chassis airflow and validated 10GBASE-T cabling; Cat 6A supports specified 100m reach.
Variant warningX520-T2 is copper RJ-45, not X520-DA2 SFP+; do not apply firmware or transceiver notes across these SKUs. Verify PBA and device IDs.

Model and revision notes

X520-T2 is copper RJ-45, not X520-DA2 SFP+; do not apply firmware or transceiver notes across these SKUs. Verify PBA and device IDs.

Intel ixgbe Linux driver; Windows Server/VMware packages are version- and NVM-dependent.

PCIe x8, chassis airflow and validated 10GBASE-T cabling; Cat 6A supports specified 100m reach.

Archival, ESD and preservation notes

Record PBA/NVM and both MACs; check heatsink and copper jacks, then store in ESD shield.

Document source URL, access date, document revision and specimen label/condition. Preserve without credentials or private configuration.

Primary manufacturer and standards sources

  1. Intel X520-T2 adapter specificationsPrimary manufacturer or standards documentation; verify exact SKU and host revision.
  2. Intel Ethernet software downloadsPrimary manufacturer or standards documentation; verify exact SKU and host revision.
  3. IEEE 802.3 Ethernet standardsPrimary manufacturer or standards documentation; verify exact SKU and host revision.

Manufacturer statements cover the named part or its documented product family; the exact labeled revision and vendor compatibility list take precedence.