ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ MODEL-SPECIFIC NETWORK HARDWARE ]

DrayTek Vigor 130 VDSL2/ADSL2+ Modem

DSL bridge-oriented modem with Annex A copper-line operation, selectable VDSL2 profiles and one Gigabit Ethernet handoff.

Original local drawing of a Vigor 130 DSL modem showing telephone-line and Ethernet interfaces
UNIQUE LOCAL SVG // REFERENCE SCHEMATIC, NOT TO SCALE

EXACT MODEL: DrayTek Vigor 130. This is not the later Vigor 165/167 and not a regionally distinct Annex B unit.

Exact specifications and compatibility

Model / SKUDrayTek Vigor 130, Annex A regional model.
Modem standardVDSL2 ITU-T G.993.2, profiles 8a/b/c/d, 12a/b, 17a and 30a; supports ADSL/ADSL2/ADSL2+ Annex A fallback and G.vector/G.INP features subject to firmware and DSLAM.
InterfacesRJ-11 xDSL line socket; 1 × 10/100/1000BASE-T RJ-45 Ethernet LAN/handoff. Bridge mode is the normal modem-only setup.
Downstream / upstreamVDSL2 line capability up to 100Mb/s downstream and up to 100Mb/s upstream on supported profiles; ADSL2+ Annex A up to 24Mb/s downstream with Annex/profile-dependent lower upstream capacity. Loop length, noise and ISP profile reduce attainable rates.
Telephone serviceThe RJ-11 connector carries DSL on the subscriber pair; this model has no analog telephone output or VoIP telephone service. Use the provider-prescribed POTS splitter/filter where voice shares the pair.
Provider compatibilityRequires a copper DSL service using a supported Annex and VDSL2 profile/ADSL mode; confirm DSLAM interoperation, VLAN/PPPoE handoff and Annex with the ISP. It is not a cable or fiber ONT.
Firmware / host compatibilityDrayTek publishes firmware and configuration documentation for Vigor 130; match region, hardware and firmware release before updating. Ethernet bridge operation needs no PC modem driver; ISP credentials and VLAN settings are external.
Power and safety12V DC, 1A supply; maximum consumption listed as 6W. Use the rated adapter, keep ventilation clear, protect the indoor unit from moisture and do not connect the low-voltage input to mains.

Model-specific notes

VDSL2 maximum rates depend on the profile and copper loop. In bridge mode the connected router handles PPPoE, VLAN, routing, DHCP and firewall functions.

Manufacturer specifications and manual

  1. DrayTek Vigor 130 official product specificationsManufacturer specification for DSL standards, profiles, interfaces, and line-rate capability.
  2. DrayTek Vigor 130 Quick Start GuideManufacturer-hosted setup and safety guide for the model.
  3. DrayTek Vigor 130 firmware and downloadsOfficial regional support route; check hardware, region and firmware release applicability.