[ MODEL-SPECIFIC NETWORK HARDWARE ]
D-Link DGS-1005A Rev F 5-Port Gigabit Desktop Switch
Five 10/100/1000BASE-T RJ-45 auto-negotiating ports, with no dedicated uplink and no PoE. This record is scoped to revision F/F1 documents; DGS-1005A revisions are not assumed electrically interchangeable.
MODEL IDENTIFICATION: DGS-1005A, hardware revision F (datasheet for F1; inspect label because revisions may differ). Match the complete model and hardware revision on the label before applying specifications.
Exact specifications and compatibility
| Cataloged model / revision | DGS-1005A Rev F — DGS-1005A, hardware revision F (datasheet for F1; inspect label because revisions may differ) |
|---|---|
| Dedicated subcategory | Unmanaged switches |
| Ports and line rates | 5 × 10/100/1000BASE-T RJ-45; nominal negotiated link rate up to 1 Gb/s per port. |
| Switching capacity | 10 Gbps manufacturer switching fabric; this is aggregate switching capacity, not a measured application-throughput result. |
| PoE | No PoE input or output is specified for this model. |
| Uplink and media | No dedicated uplink or optical cage; all ports are copper RJ-45 and any port may connect upstream. Use standards-compatible twisted-pair Ethernet cable. |
| Power | External AC/DC adapter; the F1 sheet specifies up to 3.9 W switch consumption. Match the adapter output and polarity to the unit label rather than inferring it from another revision. |
| Form factor | Fanless, compact desktop plastic enclosure; external power adapter. |
| Host compatibility | Connect ordinary copper Ethernet devices and upstream equipment; no host-specific driver is needed. Confirm revision and adapter output on the physical unit before installing. |
| Compatibility caveat | Five 10/100/1000BASE-T RJ-45 auto-negotiating ports, with no dedicated uplink and no PoE. This record is scoped to revision F/F1 documents; DGS-1005A revisions are not assumed electrically interchangeable. Confirm regional SKU, revision, supported cable category and adapter rating; nominal link rates do not guarantee end-to-end throughput. |
| Management / drivers | Unmanaged Layer 2 switch; no switch configuration interface or host driver is required. Do not infer VLAN, routing, PoE, or managed-switch features. |
Model-specific notes
Five 10/100/1000BASE-T RJ-45 auto-negotiating ports, with no dedicated uplink and no PoE. This record is scoped to revision F/F1 documents; DGS-1005A revisions are not assumed electrically interchangeable. Switching capacity is the manufacturer’s aggregate fabric figure; it is not a benchmark. The switch does not provide Internet access by itself and requires an upstream network/router for external connectivity.
Manufacturer and data-sheet sources
- D-Link DGS-1005A official product informationManufacturer product documentation for the exact model/revision, including specifications and support details.
- D-Link DGS-1005A F1 official data sheet (PDF)Manufacturer product documentation for the exact model/revision, including specifications and support details.
Specifications apply to the stated model/revision and source region. Verify the physical nameplate and bundled adapter before use; product variants with similar names may differ.