ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ EXACT MODEL / SKU ]

Cisco Catalyst C9200L-24T-4G-E

Exact physical interfaces and their nominal link rates are documented below. Link rates are not measured application throughput.

Original local schematic port map for Cisco Catalyst C9200L-24T-4G-E, not a product photograph
UNIQUE LOCAL SVG // PORT MAP NOT TO SCALE

IDENTIFICATION: Confirm model/SKU, hardware revision, power supply and firmware on the physical unit. No measured throughput is asserted.

Model-specific specifications and compatibility

Exact model / SKUCatalyst C9200L-24T-4G-E; manufacturer SKU C9200L-24T-4G-E.
Hardware revisionPID identifies the exact non-PoE model; the hardware revision is label-specific and is not encoded in this PID. Record chassis revision and serial from the unit.
Port count and rates24 x 10/100/1000BASE-T RJ-45 data ports; none provide PoE. Rates are per interface; aggregate full-duplex capacity is not a single-port throughput figure.
PoE standard and budgetNone; the -24T data-only SKU has no PoE output.
UplinksFour fixed 1GbE SFP uplinks, separate from copper access ports; not SFP+.
Management and VLANManaged Cisco IOS XE switch; 802.1Q VLANs, 802.1X, QoS, ACL, STP and EtherChannel features depend on release/license.
Power inputInternal replaceable AC supply, input 100-240 V AC 50/60 Hz; installed supply PID depends on order configuration.
Power and compatibility1U rack system; verify IOS XE release, approved 1Gb SFP, PSU PID and revision label.
Measured performanceNo independently measured packet-forwarding rate or latency is claimed. Test with documented firmware, packet sizes, port pairs, VLAN/QoS configuration and traffic direction if required.

Installation and identification notes

  • Record SKU, revision, PSU label, serial, firmware and port mapping before commissioning; similar model suffixes may use different power and firmware.
  • Match copper cable category/length and SFP rate, wavelength, fiber type and reach to both ends of every link.
  • For PoE models, confirm endpoint IEEE class negotiation and calculate demand against both per-port limits and aggregate budget.
  • Preserve configuration backups and vendor documentation without publishing credentials or private network data.

Manufacturer datasheets and manuals

  1. Cisco Catalyst 9200 Series official data sheet (PDF)Official Cisco model/series support or specification source; confirm revision against the unit label.
  2. Cisco Catalyst 9200 Series product support and documentationOfficial Cisco model/series support or specification source; confirm revision against the unit label.

Use the exact label revision to choose current firmware, installation manuals and platform compatibility notes.