ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ EXACT MODEL / SKU ]

Cisco Catalyst C9200L-24P-4G-E

Exact physical interfaces and their nominal link rates are documented below. Link rates are not measured application throughput.

Original local schematic port map for Cisco Catalyst C9200L-24P-4G-E, not a product photograph
UNIQUE LOCAL SVG // PORT MAP NOT TO SCALE

IDENTIFICATION: Confirm model/SKU, hardware revision, power supply and firmware on the physical unit. No measured throughput is asserted.

Model-specific specifications and compatibility

Exact model / SKUCatalyst C9200L-24P-4G-E; manufacturer SKU C9200L-24P-4G-E.
Hardware revisionExact 24-port PoE PID; board revision is label-specific. Record chassis hardware revision and PSU PID from the unit.
Port count and rates24 x 10/100/1000BASE-T RJ-45 PoE access ports. Rates are per interface; aggregate full-duplex capacity is not a single-port throughput figure.
PoE standard and budgetIEEE 802.3af/at PoE/PoE+; up to 370 W aggregate with an appropriately rated 600 W AC supply; check Cisco power tables and installed PSU.
UplinksFour fixed 1GbE SFP uplinks; separate from the 24 PoE access ports.
Management and VLANCisco IOS XE managed enterprise switch; 802.1Q VLAN, 802.1X, QoS, ACL, STP and EtherChannel; Layer 3 features depend on license/release.
Power inputInternal AC PSU; input 100-240 V AC 50/60 Hz. Cisco specifies 600 W PSU configuration for the 370 W PoE budget.
Power and compatibility1U rack mount; grounded circuit required. Confirm PSU PID, firmware and qualified SFPs; uplinks are 1GbE, not 10GbE.
Measured performanceNo independently measured packet-forwarding rate or latency is claimed. Test with documented firmware, packet sizes, port pairs, VLAN/QoS configuration and traffic direction if required.

Installation and identification notes

  • Record SKU, revision, PSU label, serial, firmware and port mapping before commissioning; similar model suffixes may use different power and firmware.
  • Match copper cable category/length and SFP rate, wavelength, fiber type and reach to both ends of every link.
  • For PoE models, confirm endpoint IEEE class negotiation and calculate demand against both per-port limits and aggregate budget.
  • Preserve configuration backups and vendor documentation without publishing credentials or private network data.

Manufacturer datasheets and manuals

  1. Cisco Catalyst 9200 Series official data sheet (PDF)Official Cisco model/series support or specification source; confirm revision against the unit label.
  2. Cisco Catalyst 9200 Series product support and documentationOfficial Cisco model/series support or specification source; confirm revision against the unit label.

Use the exact label revision to choose current firmware, installation manuals and platform compatibility notes.