[ MODEL-SPECIFIC NETWORK HARDWARE ]
Aruba J9150A 10G SFP+ LC SR Transceiver
Short-reach multimode-fiber 10GbE SFP+ optical module. This entry uses the labeled manufacturer model identifier and cites primary product/support documentation.
MODEL IDENTIFICATION: Match the complete model/part number and hardware revision on the item label to manufacturer documentation. Do not apply this entry to near-name variants.
Exact specifications and compatibility
| Cataloged model | Aruba J9150A 10G SFP+ LC SR Transceiver |
|---|---|
| Dedicated subcategory | SFP transceivers: optical and copper |
| Bus / host interface | SFP+ hot-pluggable transceiver; host cage compatibility is vendor-specific. |
| Ports / physical interfaces | Duplex LC; 850nm multimode optical interface. |
| PHY, radio or protocol | 10GBASE-SR; multimode fiber, up to 300m on OM3/400m OM4 per product family specification. |
| PoE | No PoE input or PoE output is documented for this product. |
| Link-rate vs throughput | 10Gb/s line rate; optical link rate is not payload throughput. Link rates are nominal negotiated/PHY specifications, not measured application throughput; no measured specimen result is claimed. |
| Firmware / driver support | No host NIC driver; switch firmware/EEPROM compatibility and supported-transceiver policy apply. |
| Compatibility checks | Use duplex multimode fiber and verify the optical link budget against the manufacturer transceiver documentation. |
Model-specific notes
Do not mate with single-mode fiber for normal SR reach.
Primary manufacturer sources
- HPE Aruba J9150A transceiver specificationsManufacturer product specification or documentation for the exact model/family.
- Manufacturer support and compatibility resourcesFirmware, driver, compatibility, revision or support details; applicability may depend on the exact hardware revision and region.
Vendor maximum rates are not test results. Confirm regional variants, hardware revision and current support status with the manufacturer.