[ MODEL-SPECIFIC COMPONENT // MOTHERBOARDS ]
Hardkernel ODROID-N2+ (PCB Rev. 0.2)
A sourced record of one model and its documented revision-specific behavior. Similar model numbers and later board spins are distinct products.
IDENTIFY THE PCB FIRST: Record silkscreen, assembly revision, product suffix and firmware string. Use revision-matched manuals and support lists; verify against the physical board.
Documented specifications
| Exact model / revision | Hardkernel ODROID-N2+ (PCB Rev. 0.2) |
|---|---|
| Socket / processor | Soldered Amlogic S922X-B, 4× Cortex-A73 and 2× Cortex-A53. |
| Chipset / architecture | Amlogic S922X-B with Mali-G52 MP4. |
| Memory | Soldered 2GB or 4GB LPDDR4 SKU; no DIMM. |
| Form factor | 90 × 90 mm SBC. |
| I/O / expansion | Gigabit Ethernet, HDMI 2, USB 3/2, eMMC socket, microSD, 40-pin GPIO and 12V input. |
| Firmware / boot compatibility | No PC BIOS; bootloader and media image control boot; use N2+ firmware. |
Compatibility and revision pitfalls
N2+ differs from N2. Confirm silk-screen, RAM SKU, 12V supply and media; GPIO is 3.3V, not 5V tolerant.
Before substitution, check exact CPU/SoC support, minimum BIOS/bootloader, memory population, power connectors and chassis requirements. Matching socket or connector alone does not prove compatibility.
Repair and preservation notes
Back up eMMC/SD and bootloader; retain heatsink/PSU, inspect GPIO/eMMC connector and avoid underside shorts.
Record provenance, labels, firmware and test conditions. Photograph traces, jumpers and cable routing before repair or cleaning.
Sources & further reading
- Hardkernel ODROID-N2+ product recordManufacturer model/SKU information.
- Hardkernel ODROID-N2+ board detailsHardware, boot, power and pinout reference.
Manufacturer manuals, CPU lists and archived technical references form the basis of this record. Revision-specific documents take precedence over family summaries.