[ INDIVIDUAL COMPONENT // MOTHERBOARDS ]
GIGABYTE GA-Z170X-Gaming 5 (rev. 1.0)
Intel Z170 / LGA1151 ATX board with DDR4, three PCIe x16-length slots and dual M.2; exact revision/BIOS matters. This is a dedicated model record; revision, CPU and firmware qualifications are documented below.
IDENTIFICATION: Verify the printed model and PCB revision against manufacturer support files before selecting a processor, memory kit, firmware image or replacement board. Similar names can describe electrically different products.
Specifications
| Catalog subcategory | Enthusiast Intel platforms |
|---|---|
| Exact board / revision | GA-Z170X-Gaming 5 (rev. 1.0) |
| Platform / era | Intel Skylake / Kaby Lake enthusiast desktop platform, 2015 |
| CPU socket / compatibility | LGA1151; 6th-generation Intel Core, Pentium and Celeron; selected 7th-generation CPUs require an appropriate BIOS and must appear on the rev. 1.0 CPU list. |
| Chipset | Intel Z170 Express |
| Memory | Four dual-channel DDR4 DIMM sockets, up to 64 GB; ECC UDIMMs (when supported) operate in non-ECC mode. XMP and overclocked speeds depend on CPU, BIOS and DIMMs. |
| Expansion slots | Three PCIe 3.0 x16-length slots with processor-lane sharing, plus three PCIe x1 slots; actual lane width depends on slot population. |
| Form factor | ATX, approximately 305 × 244 mm; confirm case/standoff support and PCB dimensions in the manufacturer manual. |
| Storage / I/O | SATA 6 Gb/s and SATA Express connectors plus two M.2 connectors; consult the rev. 1.0 manual for shared lanes, supported drive modes and port availability. |
| Firmware and validation | Use only firmware for this exact model and revision. Confirm the selected CPU in the manufacturer CPU support table and satisfy its stated minimum BIOS; consult the board manual and memory QVL for DIMM placement, shared lanes and port limitations. |
Compatibility and revision notes
ATX (305 × 244 mm). Match revision 1.0 and check GIGABYTE’s supported CPU/BIOS list before using a 7th-generation CPU. DDR4 only. Read the manual for M.2/SATA Express lane sharing, memory population rules, the correct 8-pin CPU power connector and chassis clearances.
Physical socket fit, chipset family or a matching module notch does not independently guarantee compatibility. Confirm the exact CPU, BIOS release, memory type/capacity, slot wiring, device protocol and board dimensions in the manufacturer documentation before building or servicing a system.
Preservation and repair
Record the full PCB model, revision and BIOS identifier before maintenance. Inspect socket contacts, DIMM/PCIe connectors, VRM area and electrolytic components; document any corrosion, rework or missing hardware. Use ESD-safe handling and follow the manual’s clear-CMOS procedure.
For an archive record, photograph labels and connector condition before cleaning. Do not cross-flash firmware from a similar model or revision, and never power a board with loose conductive hardware beneath it.
Manufacturer sources
- GIGABYTE — GA-Z170X-Gaming 5 (rev. 1.0) specificationsOfficial manufacturer product/manual documentation for this exact model.
- GIGABYTE — GA-Z170X-Gaming 5 (rev. 1.0) manuals and CPU supportOfficial manufacturer CPU/firmware/support reference; confirm the board marking and revision.
Specifications and compatibility can vary with PCB revision, regional SKU, processor stepping and BIOS. Consult the linked manufacturer support material for the exact board.