ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ MEMORY // IDENTIFIED VINTAGE MODULE ]

Samsung KMM5364003BSW

A three-device Samsung 4M × 36 FPM module with explicit parity width; the module datasheet specifies 5 V ±10%. This is a model-specific record, not a generic SIMM-family listing.

Original local schematic of Samsung KMM5364003BSW with 3 represented memory devices; not to scale
ORIGINAL LOCAL MODULE SCHEMATIC // NOT TO SCALE

Exact module specifications

Manufacturer / exact part numberSamsung KMM5364003BSW
Capacity16 MB (4M × 36 bits; 32 data plus four parity bits)
Generation / contact count72-pin SIMM, 72-pin single-inline-contact vintage generation
Memory mode and parityFast Page Mode (FPM) DRAM; 36-bit parity organization; not ECC
Speed / access time60 ns row-access (tRAC) timing variant documented for this module family
Operating voltage5 V nominal (module-family datasheet specifies a single +5 V supply; ±10% where stated).
Chip organizationTwo 4M × 16 DRAM devices plus one 4M × 4 Quad-CAS DRAM in TSOP packages; parity lanes make the total width 36 bits

Host compatibility & handling

Requires a 72-pin 5 V SIMM host that supports the 16 MB density and accepts parity-width memory. Verify BIOS/chipset capacity decoding and whether parity checking is enabled; a matching connector alone is insufficient.

  • 72-pin SIMMs have 32-bit data or 36-bit data-plus-parity organization; 30-pin SIMMs expose 8 or 9 bits. 30-pin and 72-pin modules are not interchangeable.
  • Confirm the system’s documented voltage, supported memory density, parity policy, bank-width/population order, and access timing before installation; matching notches do not guarantee support.
  • Handle by board edges, protect from ESD, and document the complete module/chip markings and the host used for testing.

Model-specific identification notes

A three-device Samsung 4M × 36 FPM module with explicit parity width; the module datasheet specifies 5 V ±10%. The module organization and exact SKU should be checked against the cited data-sheet/archive records and the physical label; speed suffixes are not interchangeable.

Sources & further reading

  1. Samsung KMM5364003BSW module datasheet (device organization, FPM, 5 V ±10%)Primary model-specific source for the stated part family and organization; use the matching speed-grade datasheet/label for final identification.
  2. Internet Archive — Transcend 72-pin FPM SIMM manual (module generation and legacy-host reference)Independent HTTPS archival source for vintage module generation and context. Compatibility is host-specific and must be checked in the machine's service manual.

Archive references establish the vintage form-factor context; the module data sheet and host service manual govern electrical/timing compatibility.