[ RAMBUS RIMM MODULES // IDENTIFIED COMPONENT ]
Rambus RIMM PC800
RDRAM memory module, Pentium 4 era. This entry records a distinct product or well-defined family; differences among revisions and similarly named models are called out below.
MODEL IDENTIFICATION: Match the full model/part number, revision, and region to the item label and its manufacturer documentation. Where a family has multiple revisions, specifications below are not universal across the family.
Recorded specifications
| Cataloged part | Rambus RIMM PC800 |
|---|---|
| Era / family | RDRAM memory module, Pentium 4 era |
| Key specifications | 184-pin RIMM; PC800 specifies 800 MT/s data rate; 16-bit RDRAM channel; modules required in populated channel positions. |
| Interface / fit | RIMM channel continuity modules (C-RIMMs) may be required in empty slots; supported capacity and pairing are chipset-specific. |
| Variants / identification | RIMM is not a DDR DIMM; the heat spreader and notch differ and installation pressure must be even. |
| Archive record | Record full part number, hardware revision, serial/date code, firmware/BIOS, accessories, physical condition, and the documentation revision used for verification. |
Compatibility and handling
- Confirm the complete part number, connector signal/pinout, supported host, dimensions, power, firmware and operating-system requirements before use.
- Inspect for corrosion, cracked parts, bent pins, damaged insulation, failing bearings, leaking cells, or prior repair. Avoid powering unidentified or damaged hardware.
- For compatibility claims, cite a specific manual, CPU support list, interface standard, or tested host configuration; physical fit alone is insufficient.
- Record measurements with the test setup and instrument conditions; distinguish vendor maximums from measured or sustained results.
Model notes
RIMM channel continuity modules (C-RIMMs) may be required in empty slots; supported capacity and pairing are chipset-specific.
RIMM is not a DDR DIMM; the heat spreader and notch differ and installation pressure must be even.
Sources & further reading
- Manufacturer / standards documentation — Rambus RIMM PC800Reference supplied for this specific model or standards family; verify full revision against the nameplate/manual.
- Manufacturer / standards documentation — Rambus RIMM PC800Reference supplied for this specific model or standards family; verify full revision against the nameplate/manual.
Source links may describe a product family, not the exact board revision or region. The full model-specific manual/specification takes precedence.